Younguo 622 operation
So this is my problem (After 60 years of shooting problems neve stop...Technology?)
The scenerio is thus... Younguo 622 on lightstand with canon 580 ex2 flash.
Camera 5d3 with younguo 622c and 580 ex2.
In camera set to manuel flash exposure. A:B
One Younguo (camera) set to channel 1 and A.
Light on stand to Channel 1 and B
In order to shoot in manuel with flash on stand I have to set as master as it will not set as slave.
As soon as I put info on screen while in slave mode it reverts to TTL.
Camera on flash the same. I can't have two masters?
I would appreciate some one explaining me how to set up both strobes one as a master
Preferably camera and the other as slave. Both to be adjusted in camera for light ratios.
Thank you all (whew)
|Mig-17-1 by bbmach|
from Low Pass
|Rotting Gracefully by Mond|
from Natural Decay
|attic by wgjohnston|
from In the attic, or in the basement!
|Ox Bow Aspen by McFrost|
from cell phones - nature photographs