# Why 'more or less stopped using ISO'?

Started Feb 19, 2014 | Questions thread
Re: Maybe this will help.
1

crames wrote:

bobn2 wrote:

crames wrote:

bobn2 wrote:

How does brightness figure into this? That is, CIE brightness, or are you using another definition?

I don't see how the connection between luminance and brightness would cause there to be "no such thing as ISO."

You can calculate a brightness for an sRGB value of 118, since the viewing conditions are defined and you have enough info to plug into a CIECAM02 calculator.

What would be the brightness for an sRGB value of 118, in candela per square metre?

CIECAM02 brightness correlate Q of the 8 bit sRGB value (118,118,118), Q=102.28.

Candelas per square meter are the units for luminance, not the unit-less brightness, so your question doesn't make sense.

You're obviously fishing around for something, without explaining how brightness, that is CIE brightness as discussed in this sub-thread, has anything to do with the existence or non-existence of "ISO."

Apparently "'brightness' is dependent on 'absolute luminance of the stimulus' ".

While you mull things over,

Sorry, you have the mulling the wrong way round. It's you that needs to be mulling. Apparently 'brightness' is dependent on 'absolute luminance of the stimulus' and yet we find that 'brightness' has nothing to do with luminance, so mull that one over.

"And yet we find that 'brightness' has nothing to do with luminance..."

I really don't think "we" have found that to be the case at all. Certainly nothing I have posted agrees with that.

Where in the world did you get that from?

'Candelas per square meter are the units for luminance, not the unit-less brightness'. That was what you wrote, was it not?

here's a question for you, Bob:

I take a picture at f/16 1/100 ISO 100. Now I want to take another shot where the final image is twice as bright. What ISO setting should I use?

I wouldn't be using f/16, 1/100 in the first place, so it's a hypothetical. But I wouldn't be using 'ISO' or exposure to set the brightness, whatever.

Good for you. However I believe you have stated in various threads that ISO is a brightness control, so I was just trying to establish what might be the relationship between the two.

That is easy, you'll find it in the ISO standard:

You didn't need me to tell you that. Sorry, I thought you were asking for advice. I was wondering why you'd ever choose f/16, 1/100, it seems a pretty unlikely combination to me.

-- hide signature --

Bob

Complain
Post ()
Keyboard shortcuts: