Radiopopper RPCube

Started Oct 26, 2013 | Discussions thread
Flat view
Adam Filipowicz Regular Member • Posts: 378
Radiopopper RPCube


I am having issues getting some new RPCubes to work

Here is the hardware I have

Radiopopper JRX Transmitter – QTY 1
Radiopopper JRX Studio Receiver – QTY 2
Radiopopper RPCube - QTY 2
Radiopopper 2' Male->Male Miniack cable – QTY 2

Canon 420EX Flash

Canon 600ex-rt Flash



When I plug the Flashes into the RPCube, and plug the RPCube with the supplied cable into the JRX receivers,
I cannot get the flashes to fire at all.

I have read online that possibly the cable supplied was defective, so I tried several other cables with the same result

The Switch setting on the receivers are as follows
1-6 OFF
7&8 ON

The Switch setting on the transmitter is as follows
1-6 OFF

The website says "Canon: The JrX Receiver with RPCube will control power on all Canon flashes."

I have tried turning the flash on after the JRX and cube are connected, and vise versa

I can connect the JRX directly to the 600exrt via the PC Sync port and it will fire reliably but cannot control the light output power this way

Please help

-- hide signature --

View my gallery here
Canon 6D
Canon EF 180mm F3.5L USM Macro
Canon EF 50mm 1.4
Canon Pixma Pro 9000 Mark II

 Adam Filipowicz's gear list:Adam Filipowicz's gear list
Canon EOS 40D Canon EF 50mm f/1.4 USM Canon EF 180mm f/3.5L Macro USM Canon MP-E 65mm f/2.5 1-5x Macro +1 more
Canon EOS 6D
If you believe there are incorrect tags, please send us this post using our feedback form.
Flat view
Post (hide subjects) Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow