Nikon D200 and low-light low-ISO photography??

Started Jul 25, 2013 | Discussions thread
n057 Veteran Member • Posts: 6,387
Re: Nikon D200 and low-light low-ISO photography??

Cytokine wrote:

We all know that CCD is for good light and CMOS is for poor lighting conditions, where we can amplify the light by turning up the ISO. Well this is not entirely true, and it highlights the fundamental differences in the two technologies.

The key here is amplification CMOS needs a certain amount of light to work, otherwise the amplified signal can't be differentiated from its rather noisy dark state. In other words 10 X 1 = 1, but give the sensor 2 and 2 x 10 = 20 in which case the background noise of 1 is a fraction of the amplified signal. by comparison the CCD has say a dark noise of 0.2 so up to the CMOS threshold, it is better.

When the ambient light is good enough, the CCD's don't require so much amplification and their quiet noise levels come back in to the game.

So for tripod work in low light situations give your D200 a try! You might be surprised.

This photograph made me realise that if the camera is bolted down you can shoot at base ISO at some surprisingly low shutter speeds. John

I found that out also, although I usually shoot at high ISO handheld.

But here is a low ISO tripod long exposure.

Some cameras, some lenses, some computers

 n057's gear list:n057's gear list
Nikon Coolpix 995 Nikon D200 Nikon D500 Nikon AF-S Nikkor 70-200mm f/2.8G ED VR Nikon AF-S DX Nikkor 35mm F1.8G +7 more
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow