Started Jul 9, 2013 | Questions thread
Re: Not exactly

texinwien wrote:

clack wrote:

texinwien wrote:

For starters, ISO is not a variable in the exposure equation. The three variables in the exposure equation are:

1. Scene Illuminance
2. F-stop (actually T-stop, to be 100% correct)
3. Shutter Speed

APEX camera exposure equation:

A: relative aperture (f-number)
T: shutter speed in seconds
B: average scene luminance ("brightness")
Sx: ASA arithmetic film speed (ISO goes here)
K: light meter calibration constant

K is a constant, B is not part of the camera settings.
This leaves the camera operator - or, camera control chip - with A, T and Sx.

Voila, the exposure triangle is part of 'the' exposure equation...

That's the wrong formula. It's an artificial formula built specifically to tell the photographer how to adjust the exposure values (aperture, shutter speed, scene luminance) to match the ASA / ISO.

Exposure (photography)

In photography, exposure is the amount of light allowed to fall on each area unit of a photographic medium (photographic film or image sensor) during the process of taking a photograph.

Note: Nothing about ASA or ISO above, and neither ASA nor ISO have any effect on the amount of light allowed to fall on each area unit of a photographic medium.

Exposure is measured in lux seconds, and can be computed from exposure value (EV) and scene luminance in a specified region.

What's EV, and how do we calculate it? Let's see:

Exposure Value

EV corresponds simply to a combination of a shutter speed and an aperture setting, independent of any ISO setting—independent even of whether there is film in the camera or any light available.

...

So, Exposure can be computed from scene luminance and EV (which, in turn is computed from the shutter speed and aperture setting). This leads us back to my previous post - the only 3 variables involved in the equation used to determine photometric exposure are scene luminance, shutter speed and aperture setting (or t-stop to be extra technical).

From the Exposure article linked above, this is the equation (photometric / luminous exposure) you need:

Hv is the exposure, Ev is the image plane illuminance (determined by the scene luminance and aperture setting) and t is time (aka the shutter speed).

et voila, APEX isn't the equation used to determine photometric exposure. It's simply a formula that photographers can use to adjust the three variables that make up the photometric exposure equation - shutter speed, aperture and scene luminance (where possible) - based on a given ASA or ISO.

Interesting how that Wiki article has been manipulated through the years, to imply that photographic exposure has nothing to do with the photographic medium. It has been changed from a definition of photographic exposure. To simply one of light exposure, which is incorrect.

That is the problem with Wiki a group of individuals can change it to suit their opinion regardless of fact.

What Wikipedia use to say about Exposure (Photography):

In photography, the total amount of light allowed to fall on the film during the process of taking a photograph.

The correct exposure for a photograph is determined by the sensitivity of the film used. Film sensitivity is referred to as 'speed' and is measured as an ISO rating. Faster film requires less exposure and has a higher ISO rating.

Exposure is controlled in a camera by shutter speed and lens aperture. Longer shutter speeds and greater lens apertures produce greater exposures.

Exposure is measured in 'ev' with higher values denoting more light.

For example, an approximately correct exposure will be obtained on a sunny day using ISO 100 film, an aperture of f11 and a shutter speed of 1/100th of a second.

The Zone System is an excellent method of determining exposure.

TTMartin's gear list:TTMartin's gear list
Canon PowerShot S100 (2000) Canon PowerShot SD1000 Canon PowerShot G1 X Canon EOS 40D Canon EOS 400D +26 more
Complain
Post ()
Keyboard shortcuts: