Minolta MC 1,4/50 experiences

Started Mar 10, 2013 | Discussions thread
OP eques Senior Member • Posts: 2,923
Re: "Glowy" lenses usually caused by haze, scratches, or fungus

Thank you for your detailed answer.

ProfHankD wrote:

john-photoguy wrote:

I bet that there is a haze (or dare I say fungus) on the inside of the lens,

Many older lenses are slightly "glowy" -- which is what you're complaining about. Teleconverters and glass adapters greatly magnify the effect, often producing IQ usable only as a special effect.

The glow can come from many factors, ranging from incorrect reassembly of the lens after cleaning to sensor reflections. Some lenses also have a little glow by nature of their optical design, but generally not as severe as what you're showing. For a sharp image with heavy glow the most likely culprit is some type of diffuser in the lens:

  • Haze is simply the deposition of diffusing material on (inner) lens surfaces over time. Most lenses suck air through as you focus, and humidity, volatile organics, and other materials go along with it, condensing and accumulating on inner surfaces over time. I've also seen a lens where oil had spread out onto an element near the aperture iris. Cleaning internal surfaces is problematic, but the only fix.

I could not make out any haze on the internal lenses. The lenses look clear to me. But of course I am no expert.

  • Contrary to popular belief, scratches don't have much impact on lens sharpness, but they do cause refractive problems like glow. The impact of surface scratches can be reduced by filling them with light-absorbing material, such as black paint, but that is feasible only for very deep scratches. Scratches in the rear element usually impact IQ far more than ones in front.

There are no visible scratches.

  • Fungus, with its well-known white branching structures, will reflect a little light.

There is no visible fungus in the lens.

  •  However, it's after a long-term fungus infection that the real glow issue starts -- especially after the fungus is removed. Fungus emit chemicals that can etch lens glass (certain glasses more than others; for example, some older Canon lenses seem to be particularly vulnerable), leaving the equivalent of many-faceted micro scratches after the fungus has been removed. Once etched, no simple repair is possible.

This seems to me the only possibility left.

Note that dust usually doesn't cause glow because typical dust particles block light, rather than causing refraction. Close visual inspection of the lens with a penlight should tell you which problem you have....


 eques's gear list:eques's gear list
Ricoh GR Panasonic Lumix DMC-GX7 Panasonic Lumix G 20mm F1.7 ASPH Olympus M.Zuiko Digital ED 40-150mm 1:4-5.6 R Samyang 7.5mm F3.5 UMC Fisheye MFT +3 more
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow