Paper for Panoramas

Started Feb 23, 2013 | Discussions thread
Peter Patricelli Regular Member • Posts: 334
Re: Several answers

Using the 3880 I cut pan paper from Red River UltraPro Gloss rolls of 24" 17" intrervals, cut by hand with a square tool and blade on a table with cutting groove I constructed...cheaply,  AND I cut from rolls of 17" pape with a roller cutterr...any far up to 72"

Using PrintFab, the free beta version is still circulating, the maximum width is 16.7", The max length is 500+ inches.  The biggest problem is starting the feed exactly straight or the skew can run off the paper, if printing at say 16.7"....not much margin.... before coming to the end.  There was a thread on this board (do a search) about mechanical aids at starting the feed as straight as possible, and straightening the feed once started.

So far, not knowing any better, I have been feeding through the rear cut paper feeder, with UN flattened paper, with NO problems whatsoever.

-- hide signature --

Peter Patricelli

Post (hide subjects) Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow