Have a problem with my OM-D, can't access SCP
I was wondering if anyone else came across this problem.
I'm using the original firmware still.
I setup my camera to display the SCP when pressing OK in the usual PASM modes (settings > D > control settings > Live SCP).
Recently I bought a Olympus FL-36R flash and enabled remote flash mode (menu > camera2 > RC mode) and noticed when the flash was mounted pressing the OK button displayed a flash menu (to adjust channels and such like) rather than the SCP (I'd rather it didn't do this).
Anyway, now (with the RC mode turned off and no flash on the camera) I can't seem to access the SCP. I can get it by pressing the display button beside the viewfinder, but it covers the whole screen and doesn't show the live view behind it. So I can't quickly change settings anymore.
Is there something simple I've missed? It's all enabled in the settings > D > Control settings > Live SCP menu, I'm not sure what else I can change apart from update the firmware if it's a known problem.
|Fascia walkie talkie building London by ian herridge|
from Abstract Architecture
|Global Reach by cjf2|