OM-D high-speed burst, IBIS, Panny 100-300 and Mega-OIS

Started Dec 27, 2012 | Discussions thread
Chris K. Regular Member • Posts: 419
Re: OM-D high-speed burst, IBIS, Panny 100-300 and Mega-OIS

Anders W wrote:

With OIS too, the EVF/LCD is stabilized before capture. If you have the OIS set to use mode 1 (which is the default), OIS works whenever the camera is on. IBIS, by contrast, is stabilized only during the exposure and when you half-press the shutter button (if you have enabled that option).

I think my misinformation came about because I had OIS on with IBIS.  I had read that if the OIS on a lens is switched to on before the camera is powered up, the OM-D would disable the IBIS.  Apparently this is not correct and the jumping around of the image before the shot in the viewfinder was from the two systems fighting each other.

-- hide signature --

Best Regards,
"See the Light"
photography by Christian Kuiphoff

Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow