Underwater housing for RX100

Started Aug 1, 2012 | Discussions thread
Surya P Junior Member • Posts: 43
Re: Underwater housing for RX100

ktwse wrote:

Thanks for the excellent report, Surya.

I'm more and more leaning towards the RX-100 for my next underwater rig. Just sold of my E-PL2 and was looking at the OM-D but the RX-100 with the Nauticam housing and a couple of wet lenses seems capable of the same IQ in a much smaller and much cheaper package.

Do provide a report once you've received your housing and used it a bit!


Sure Tom. Will show some results. But me video guy mostly.

I now have Inon 165 magnifier to go with RX100 :
I will use 165 as macro extra power
I am also intending to get Subsee +5 and +10.


I also will use Inon UWL-100 wide angle adapter http://www.camerasunderwater.info/optics/inon/uwl100.html

All lens shown will fit Nauticam flip diopter 25101 and that means my NEX7 dan D800 can share the macro/magnifier lens.
That Nauticam flip diopter 25101 can go on my Nauticam NEX7 and Nauticam D800.

All my NEX7 ports, except wide angle dome 4.5", has 67mm thread. The D800 macro port 87, also has 67mm thread. So no waste having 3 macro wet lens or two of the Flip Diopter 25101.

I can also use URpro 67mm Cyan filter for video in ambient light up to 15 meters, and nothing beats the color correction value of URpro Cyan. Need to order them, me only have 52mm URpro Cyan filter for my GoPro, not yet a 67mm.

You should get the Nauticam Flip Diopter 25101 ( it is 67mm ), it is very flexible, instead of threading permanently on your Nauticam RX100 67mm thread on its port any wet lens.
Have fun shopping........

Post (hide subjects) Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow