D4 vs 1Dx (Imaging Resource), RAW, ACR, 6400-12800

Started Sep 4, 2012 | Discussions thread
bobn2
bobn2 Forum Pro • Posts: 58,560
Re: D4 vs 1Dx (Imaging Resource), RAW, ACR, 6400-12800

Lance B wrote:

teodorian2 wrote:

rhlpetrus wrote:

IR has posted the IDX studio shots. I converted with ACR, NR=0, Adobe Standard, all other setting default.

6400 and 12800, 100%. Judge for yourself.

The tests done by Imaging Resource are really of no real practical value:

1) The scene is very well lit: When do anyone shoot at ISO 102400, 1/5000 s, f16 using a Nikon D4?

2) The exposure is not the same for different cameras resulting in not valid comparisions of noise,

I have to disagree. If these two cameras were to shoot a similar scene, then the aperture, shutter speed and ISO would be what was actually used and therefore the result would be as shown.

The exposure is the combination of scene luminance, shutter speed and f-number only . If the scene luminance is the same (and I can't see any good reason why it should be different if the light positions and luminance remain the same) then the only way that the exposure can be the same is if the EV (combination of shutter speed and f-number) is the same. Here it clearly isn't, so the conclusion can only be that the lighting is different or the exposure is different or both. Whatever, the difference is enough to spread doubt on the validity of this test.

The actual exposure is important since it directly controls the amount of noise in the image.

It matters not whether they are off by a 1/3rd of a stop or whatever, it matters what was required to get the desired result just as you would if you used either camera in a particular scene in real life. The thing is, one may have slightly different ISO equivalent requiring slightly different shutter/aperture/ISO being required, but the point is, the end result would be the same.

You have a strange idea of how the cameras would be used in 'real life'. In real life in low light you have the constraints of smallest f-number and slowest shutter speed you can use. Those are absolute, and what matters is the result that a camera gives with those constraints. ISO is irrelevant. If you are wide open, and can give a maximum of 1/30 second, you use the ISO setting that gives you that, and it might be different on different cameras.

-- hide signature --

Bob

Post (hide subjects) Posted by
ET2
ET2
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow