Problem with 7D v. 2.0 and EOS Utility 2.11.4

Started Aug 8, 2012 | Discussions thread
Larry Wallis Regular Member • Posts: 130
Re: Problem with 7D v. 2.0 and EOS Utility 2.11.4

I’ve been using this to try to MFA my lenses and it works on an XP computer and a Windows 7 laptop.

However, a couple of stupid ideas:

When you say the “AF button” you don’t mean the button at the top left of the first screen do you? I’ve found this only works in “normal” view. When you move to live view you get the new screen and you operate the live view focusing from the new screen.

The way I play with it is to hover over the “normal” focus button on the first screen until I hear the camera beep to say it’s got focus. Then I open up the live view screen, then the magnified view and look at the live image. In both live view windows you can move focus back and forward to give an idea of how far off the original position was. And you can "fully" live focus using another button, on the live view screen, if you want to (by this I mean mimic the camera's live view focus so you end up with the centre square changing from white to green).

I then close down all the live view windows and try a new MFA value in the camera, hover over the normal focus button etc etc repeating the whole process. This is actually a long story as I’ve discovered just how often the AF miss-focuses due purely to random changes… a topic for another thread!

The second idea, if you know the above, is that using a long interconnecting cable between the computer and camera may cause odd glitches.

Larry Wallis

Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow