Tips and tricks for setting up the OM-D E-M5

Started May 3, 2012 | Discussions thread
Ergo607 Senior Member • Posts: 1,294
Re: Compose w/EVF, auto review image on LCD - doesn't work for me...

Hi Bob,

doing exactly what you describe, but that doesn't seem to work for me. What am I doing wrong?

Bob Tullis wrote:

It's a little quirky, but it works. . .


Wrench (Settings), Rec View = Auto
Cog-J (Built In EVF), EVF Auto Switch = On

I'm set up to use the EVF with the LCD screen blank.

. Press button on right side of EVF to make the EVF the primary display.
. Press Info repeatedly until the LCD screen is blank

When I take a shot and keep my eye at the EVF, the review displays in the EVF momentarily, then switches to show up in the LCD. Removing the camera from the eye, the review remains. To shoot again, look through the EVF (the review on the LCD ends as you get back the LV in the EVF). If you just want to blank the EVF, hold the camera close to the body or put a thumb near the EVF for the sensor to detect).

The key here, I believe, is not to remove your eye from the EVF before the review shows up in the EVF. If you drop the camera from your face before you see the review in the EVF, neither the EVF or the LCD will display (they'll both remain blank).

Using the .5, 1, 3, etc. second review setting will not allow this operation, the Rec View must be set to Auto.

-- hide signature --
 Ergo607's gear list:Ergo607's gear list
Pentax K20D Pentax K-1 Pentax smc FA 50mm F1.4 Pentax smc DA 18-55mm F3.5-5.6 AL Pentax smc DA 10-17mm F3.5-4.5 ED (IF) Fisheye +5 more
Post (hide subjects) Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow