Hot pixel mapping for the C-2100 UZ works!

Started Sep 5, 2003 | Discussions thread
crb55 New Member • Posts: 5
Re: Hot pixel mapping on a C-700?

Well I figured out how to remap a c-700uz using the program at http://e2500.narod.ru/ccd_defect_e.htm with v0.15. You have to go to a secrete menu by removing the card turn camera back on (it says no card) then holding down the OK button and the lcd button at the same time for about 3 seconds and a menu will come up it says (camera control) on or off, set it to on. I put the card back in and tried the program and it then worked worked (don't know if you have to put the card back in or not but I did. P.S. I turned the camera off when I took the card in and out and I had the dial set on manual. I ran the read and it found 16 bad pixels then I ran the map then I ran the read again and it looked like it didn't do any thing but when I tested it all the stuck pixels were gone. Oh yea you need to go back and set the camera control to off again, mine wouldn't take any pictures until I did.

Post (hide subjects) Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow