OS X: Click-to-print twice to get one print!
With Lightroom 2.1 and still in 2.2, whenever I print, 95% of the time the first print goes into la-la land (i.e. - nothing happens). I do the same print operaton again - and the print happens.
This is with a 3800 on Ethernet and a 1400 on USB - so I half suspect it must be something between OS X and LR. On the first click, I hear the processor cooling fans rev up - get a message that the image is being rendered, but it never makes it to the printer. Same sounds/messages on second click, but the print happens.
The 3800 has printer firmware v o000573, network firmware v1.01
The 1400 is only about 3 months old - Using QTR as the print-driver with Piezeography inkset, so the Epson driver is out of the picture for this one.
OS X 10.4.11; G5 6G ram
Who was Ansel Adams' Ansel Adams?
- Canon EOS M58.8%
- Panasonic G85/G803.3%
- Panasonic FZ2500/FZ20001.9%
- Panasonic LX10/LX151.2%
- Panasonic GH5 development3.6%
- Sony a99 II15.9%
- Nikon KeyMission 170 and 801.0%
- Fujifilm GFX 50S development28.3%
- Olympus E-M1 II development18.7%
- Olympus E-PL80.1%
- Olympus 25mm F1.2 Pro1.5%
- Olympus 12-100mm F4 IS Pro1.9%
- Olympus 30mm F3.5 Macro0.1%
- Sigma 85mm F1.4 Art3.6%
- Sigma 12-24mm F4 Art2.6%
- Sigma 500mm F4 DG OS HSM Sport2.4%
- YI M12.2%
- GoPro Hero50.8%
- GoPro Karma drone2.2%
|Sunflower Field by GrannyMeg|
from An impressionist piece
|Flag from Staten Island Ferry by wam7|
|SAND SCULPTURE by duskman|
from Landscape - Black and White #4