Super SteadyShot (Sensor-shift Image Stabilization)
The DSLR-A200 features Sony's 'Super SteadyShot' sensor-shift image stabilization system (a development of the 'Anti-Shake' system we first saw on the Konica Minolta 7D). This system works by moving the sensor in the opposite direction to the sensed shake movement of the camera.
The stabilization test
This test is designed to produce a determination of the relative improvement you should expect using the SteadyShot system compared to with it switched off. Twenty hand-held shots are taken of a static scene at reasonable shutter speed (1/80 sec in this case), ten without stabilization, ten with. The shutter speed is then decreased by a a third of a stop and twenty more shots taken, this is repeated down to 1/4 sec. The test chart was approximately 1.2 m away from the camera.
The resulting images were then inspected and given a blur score from zero to three where zero represented a very blurred image and three a sharp image with no noticeable blur (see crop examples below). Obviously the amount of blur which is acceptable will depend on your personal taste and the final image size (for instance a '2: Soft' will still look fine as a 4x6 print or in a web gallery). Example crops from these four blur scores can be seen below.
|0: Very blurred||1: Blurred|
|2: Soft||3: Sharp|
Hand-held, no stabilization (75 mm equiv. FOV)
Without Super SteadyShot, we only get 100% sharp images when shooting at 1/100th of a second. Below that, the 'keeper' rate drops off progressively and when shooting at slower speeds than 1/25th of a second we don't get any keepers at all.
Hand-held, with Super SteadyShot (75 mm equiv. FOV)
With 'Super SteadyShot' switched on the improvement is immediately visible. We get 100% usable shots down to shutter speeds as slow as 1/6th of a second. The system gives you an advantage of between 2 and 2.5 stops.