Previous page Next page

Resolution Chart Comparison (JPEG and raw)

Images on this page are of our standard resolution chart which provides for measurement of resolution up to 4000 LPH (Lines Per Picture Height). A value of 20 equates to 2000 lines per picture height. For each camera we use the relevant prime lens (the same one we use for all the other tests in a particular review). The chart is shot at a full range of apertures and the sharpest image selected. Studio light, cameras set to aperture priority (optimum aperture selected), image parameters default. Exposure compensation set to deliver approximately 80% luminance in the white areas.

What we want to show here is how well the camera is able to resolve the detail in our standard test chart compared to the theoretical maximum resolution of the sensor, which for the charts we shoot is easy to work out - it's simply the number of vertical pixels (the chart shows the number of single lines per picture height, the theoretical limit is 1 line per pixel). Beyond this limit (which when talking about line pairs is usually referred to as the Nyquist frequency) the sensor cannot faithfully record image detail and aliasing occurs.

This limit is rarely attained, because the majority of sensors are fitted with anti-aliasing filters. Anti-aliasing filters are designed to reduce unpleasant moiré effects, but in doing so, they also reduce resolution (the relative strength and quality of these filters varies from camera to camera). In theory though, a sensor without an AA filter, when coupled with a 'perfect' lens, will deliver resolution equal to its Nyquist limit. Therefore, even though it may be effectively unattainable with normal equipment in normal shooting situations, an understanding of a sensor's theoretical limit provides a useful benchmark for best possible performance. Nyquist is indicated in these crops with a red line.

On this page we're looking at both JPEG and raw resolution. For a (more) level playing field we convert the latter using Adobe Camera RAW. Because Adobe Camera RAW applies different levels of sharpening to different cameras (this confirmed) we use the following workflow for these conversions:

  • Load raw file into Adobe Camera RAW 7.1 (Auto mode disabled)
  • Set Sharpness to 0 (all other settings default)
  • Open file to Photoshop
  • Apply a Unsharp mask tuned to the camera, usually 100%, Radius 0.6, Threshold 0
  • Save as a TIFF (for cropping) and as a JPEG quality 11 for download
JPEG (4912 x 3264) 3.4MB RAW (4912 x 3264) 15.9MB

Vertical resolution


Horizontal resolution


One thing that becomes obvious when looking at our test chart is that the A57's JPEG engine does little to suppress moiré patterning, displaying it to much the same degree as the camera's raw files processed through ACR 7.1. You can distinguish all individual line pairs until roughly 2400 LPH, which places it well within the range of APS-C cameras of similar pixel count, like the Canon EOS 650D and the Nikon D5100.

You can eke out marginally more detail with careful raw file processing. The greater benefit to shooting raw files, though, is that you can avoid artifacts halos along high contrast edges and still come away with a more 'crisp' and thus perceptually 'sharper'-looking image.

Previous page Next page
I own it
I want it
I had it
Discuss in the forums


Total comments: 4

recently got a sony a57 when shooting with a minulta lens the image on the display is crystal clear for about 2 seconds and then goes blurry. does anybody know how to stop this?


As I know a lesser lens might introduce coloured fringing around sharp, fine contrasts in an image such as this -- particularly in the upper-left corner where the branches overlay the sky -- but the SAL1855 passed with flying colours

1 upvote
m Anthony

My friend has a Sony A 57, he uses the Fast frame mode, I think the "T" setting to take pictures of his daugher's sports activities, but the images are blulrred, I advised him to set a shutter speed of 1/800 or even higher, but I do not see how to do that with the "T" setting. Can this be done?
Sorry I do not own a Sony camera, this seems like a nice feature and I'm just trying to help a friend.

Thanks Much
m Anthony

Comment edited 3 times, last edit 1 minute after posting

Tell your friend to force the camera to shoot at higher shutter speed by raising the ISO, which you can control while in the T mode :)
good luck,

Total comments: 4