Previous page Next page

Resolution Chart Comparison (JPEG and RAW)

Images on this page are of our standard resolution chart which provides for measurement of resolution up to 4000 LPH (Lines Per Picture Height). A value of 20 equates to 2000 lines per picture height. For each camera we use the relevant prime lens (the same one we use for all the other tests in a particular review). The chart is shot at a full range of apertures and the sharpest image selected. Studio light, cameras set to aperture priority (optimum aperture selected), image parameters default. Exposure compensation set to deliver approximately 80% luminance in the white areas.

What we want to show here is how well the camera is able to resolve the detail in our standard test chart compared to the theoretical maximum resolution of the sensor, which for the charts we shoot is easy to work out - it's simply the number of vertical pixels (the chart shows the number of single lines per picture height, the theoretical limit is 1 line per pixel). Beyond this limit (when talking about line pairs usually referred to as the Nyquist frequency) the sensor cannot faithfully record image detail and aliasing occurs.

This limit is rarely attained, because the majority of sensors are fitted with anti-aliasing filters. Anti-aliasing filters are designed to reduce unpleasant moiré effects, but in doing so, they also reduce resolution (the relative strength and quality of these filters varies from camera to camera). In theory though, a sensor without an AA filter, when coupled with a 'perfect' lens, will deliver resolution equal to its Nyquist limit. Therefore, even though it may be effectively unattainable with normal equipment in normal shooting situations, an understanding of a sensor's theoretical limit provides a useful benchmark for best possible performance. Nyquist is indicated in these crops with a red line.

On this page we're looking at both JPEG and Raw resolution. For a (more) level playing field we convert the latter using Adobe Camera Raw. Because Adobe Camera Raw applies different levels of sharpening to different cameras (this confirmed) we use the following workflow for these conversions:

  • Load RAW file into Adobe Camera RAW (Auto mode disabled)
  • Set Sharpness to 0 (all other settings default)
  • Open file to Photoshop
  • Apply a Unsharp mask tuned to the camera, in this case 100%, Radius 0.6, Threshold 0
  • Save as a TIFF (for cropping) and as a JPEG quality 11 for download
JPEG (3648 x 2736) 2.9MB RAW (3648 x 2736) 3.2MB

Vertical resolution


Horizontal resolution


There is a clear difference in detail resolution between the D7000's JPEG and RAW output. Whereas in the JPEG files, the D7000 cannot accurately describe the 9 lines on our test chart much beyond 2600LPH (roughly), the RAW file still shows all nine lines distinctly at 2600LPH, and they only begin to merge at around 2800LPH. This is still some way off the Nyquist limit (equal to the number of vertical pixels in the D7000's output - i.e. 3264LPH) but impressive nonetheless.

Also worthy of note is the fact that even beyond Nyquist, some line detail is still visible in the D7000's RAW file. Of course this isn't 'accurate', (and represents merely how good the camera's demosaicing algorithms are at 'guessing' what lies beyond Nyquist) but it enhances the impression of fine detail. At the same point on our chart the JPEG file shows only a monotone gray mush. Comparing results from the D7000 against those from the Canon EOS 550D (which also boasts an 18MP sensor), there isn't a great deal between them in terms of absolute resolution. The Canon's JPEG files are slightly higher in contrast, which makes detail (at default settings) look slightly sharper, but this is the only significant difference.

Previous page Next page


Total comments: 2
By GEDERA GUY (5 months ago)

As an upgrade to the D80 , the D7000 is a definite improvement , but build quality is still lacking , next to say, the D300S .

That being sad , the camera handles well ,even if the video function is still an option I scorn .

The main problem I have, is the slow flash sync speed with my SB 600 flashgun - a pathetic 1/60 sec .To utilise the full potential of the D7000 , I need to upgrade my flash gun - not easy when finances are tight .

Duncan Dimanche
By Duncan Dimanche (5 months ago)

You never tell us what ISO settings you shoot at in low light mode so how is that helpful ?

Total comments: 2