Record review and playback display

Record Review

You can choose for the D40X to display a review of the image taken immediately after shutter release. The type of display used will be the same as the last mode used in playback (histogram, thumbnail, details etc.). Note that record review has all of the functionality of playback mode, this means you can use the delete, magnify, protect buttons etc.

Playback mode

Press the Playback button to display the last image taken or the last image on the card. Use the four-way up or down (or turn the sub-command dial) to change display mode (five available), press left or right (or turn the main command dial) to browse images.

1: Folder, File name, Image size, Image quality 2: Detail - Camera, Metering mode, Shutter speed, Aperture, Exposure mode, Compensation, Focal length and Flash mode
3: Detail - Image Optimization, ISO sensitivity (red indicates Auto ISO was used), White Balance, Image size / quality, Tone, Sharpness, Color, Hue, Saturation and Comment 4: Highlights - Note that the blinking areas aren't necessarily completely overexposed but are above a certain threshold
5: Histogram display - Image thumbnail, Luminance histogram  

Delete and Protect

Press the delete button to display the 'Delete?' prompt, press once more to delete the image Press the protect button to protect (small key icon appears) or unprotect an image

Playback Zoom

Press the magnify button to switch to magnification mode, simply use the multi-selector (4 way controller) to move around the image, press OK to return to full view.

Press the zoom button for playback zoom mode, image is partially magnified and an overview navigation box is shown at the bottom right As you zoom further the navigation box shows a representation of the current view
Maximum zoom is described as '25x' although doesn't appear to show any more detail than the step before After approximately two seconds the navigation box disappears, change the zoom level or scroll around and it will re-appear

Playback thumbnail views

The D40X has two levels of thumbnail view, either 2 x 2 or 3 x 3. Press the thumbnail index button to enter thumbnail mode with 4 images (2 x 2), press again to switch to the 9 image (3 x 3) view. If you leave the camera in this view mode it will use it for record review. Note that if you have the 'Rotate Tall' option enabled images taken in the portrait orientation are displayed vertically.

2 x 2 thumbnail view 3 x 3 thumbnail view

Playback retouching

During playback you can display a pop-up version of the Retouch menu by pressing the OK button, this is a faster method of applying any of the retouch adjustments to the current image. Full details of the Retouch features later in this article.