Previous page Next page


Displays

Record Review

You can choose for the D2H to display a review of the image taken immediately after shutter release. The type of display used will be the same as the last view mode (ie. histogram, thumbnail, details etc.). Note that record review mode has all of the functionality of playback mode, this means you can press delete to delete the image, press Enter to magnify etc. The image will remain on the screen for the 'Monitor off' time (CSM c5) or until you half-press the shutter release.

Playback

Press the Playback button to enter playback mode, press the multiselector left or right to view up to six pages of image information. Press the multiselector up or down to browse through images (this is virtually instant, no perceptable delay between each). You can choose to disable or enable the following pages if you wish: Data, Histogram, Highlight, Focus area. Note that you can switch the up/down and left/right functions of the multiselector via CSM f3 and that you can choose to also use the command dials to browse / change information page via CSM f5.

1: Default display (no information) 2: Folder, Frame count, Focus area
3: Data: Camera, Metering, Shutter speed, Aperture, Exposure mode, Exposure compen., Focal length 4: Data: ISO, White balance, White balance fine tuning, Tone, Sharpness, Color mode, Comment
5: Highlights (blinking) 6: Histogram overlay

Playback Zoom

Press Enter to switch into playback zoom mode, the image is partially magnified at this stage. Hold the thumbnail button and roll the main command dial (rear) to zoom in further, hold the thumbnail button and roll the sub command dial (front) to switch to a loupe mode. In either zoomed or loupe mode you can use the multiselector to move around the image.

Press Enter to switch to playback zoom mode, image is partially magnified. Hold the thumbnail button and roll the main command dial to change zoom level.
Or, roll the sub command dial to switch into magnify loupe mode. Size the loupe bounding box to the area you wish to inspect (use the multiselector to move the bounding box)
 
Roll the sub command dial once more to switch from loupe mode to zoom mode.  

Playback thumbnail views

The D2H has two levels of thumbnail view, you simply hold the thumbnail button and roll the main command dial, one click right for a 2 x 2 (4 image) view, two clicks for a 3 x 3 (9 image view). Use the multiselector to navigate the images one at a time, hold the thumbnail button and roll the sub command dial to move a page at a time. If you leave the camera in this view mode it will keep it even for record review.

One click right for a 2 x 2 thumbnail view Two clicks right for a 3 x 3 thumbnail view
Previous page Next page
42
I own it
2
I want it
69
I had it
Discuss in the forums

Comments