Previous page Next page

Studio scene comparison (Raw)

This is our standard studio scene comparison shot taken from exactly the same tripod position. Lighting: daylight simulation, >98% CRI. Crops are 100%. Ambient temperature was approximately 22°C (~72°F).

For a (more) level playing field for comparison we also shot our studio scene in Raw mode with each camera and converted it using Adobe Camera Raw. Because Adobe Camera Raw applies different levels of sharpening to different cameras (this confirmed) we use the following workflow for these conversions:

  • Load Raw file into Adobe Camera Raw (Auto mode disabled)
  • Set Sharpness to 0 (all other settings default)
  • Open file to Photoshop
  • Apply a Unsharp mask: 100%, Radius 0.6, Threshold 0
  • Save as a JPEG quality 11 for display and download.

Note: this page features our new interactive studio shot comparison widget. Click here to find out more.

Previous page Next page

Comments

Total comments: 3
gmortiz
By gmortiz (2 months ago)

D600 nightmare: After three weeks a few spots appeared. After four weeks a MASSIVE number of spots appeared and I sent it in to Nikon's New York repair facility. Two weeks later I received it, they had replaced the shutter mechanism and cleaned the low pass filter. I took some blue sky test shots which revealed spots still on the sensor. Back to Nikon for the second time. I received the D600 back from Nikon and the workorder shows all they did was re-clean the already cleaned sensor. Test shots show the exact same spots present as when they received it.

How ridiculous is it that an untrained consumer can see a serious problem in 5 minutes, and Nikon's service center has now twice sent out a camera with a damaged sensor.

One more thing: HEY NIKON - can we end the fantasy that the problem is dust? From the owner's manual: "Note, however, that the filter is extremely delicate and easily damaged." And apparently it is damaged when lubricant from the shutter mechanism hit it.

3 upvotes
nekrosoft13
By nekrosoft13 (1 month ago)

the "trained" technician is stuck in some poorly lit building. Is not like they can go outside and take shots of blue sky.

2 upvotes
hovirag
By hovirag (5 days ago)

Nikon comes clean over the dust and oil problem – meaning they fixed it. Nikon users also mentioned even before the Nikon announcement that these issues disappear after the camera has been run in.
Source: http://bubbajuju.com/get_nikon_d600_on_sale/
where there are two comparison grids of the most popular cameras to date.

0 upvotes
Total comments: 3