Previous page Next page


Record mode display (M-REC mode)

Here you can see an example of the live preview image on the LCD just prior to taking a shot, note the wide focus bracket in the center of the frame. Various settings information is displayed around the edges of the display. Settings in this example: Flash cancel, 2048 x 1536, FINE JPEG, Contrast -1, Exposure compensation +0.7, Manual White balance, ISO 100, Programme exposure, Multi-segment metering, Macro focus, Single drive, 180 frames remaining.


Half-pressing the shutter release starts the cameras autofocus, once complete it locks along with metering system. In wide-AF mode (as above) the red rectangle indicates one of three positions which the AF system has automatically selected as the focus point. If the camera can't focus it will show a red dot. The hand-shake icon indicates a slow shutter speed and that the image may suffer from blur if not on a tripod / braced.

After fully depressing the shutter release a brief review (instant playback) is shown (this can be set to 2, 10 seconds or disabled).

 

Pressing the QV/Delete button during this instant playback gives you the option to delete the frame, alternatively you can half-press the shutter release to clear the playback display (or wait 2 or 10 seconds).

 

Pressing the QV button gives a quick review playback of the last image shot, you can browse through images on the CF card by pressing the 4-way controller left or right. This display can be cancelled at any time with a half-press of the shutter release. Once in QV mode pressing the 4-way controller up switches to this detailed exposure information, note that the S304 doesn't have a histogram display mode. You have to press the down arrow to return to browsing mode.

Pressing and holding the 4-way controller for a second or more switches to AF area selection, here you can choose from one of five areas to be used for auto focus detection.

After shooting in continuous drive mode all of the images in the sequence are shown as thumbnails, at this stage you can choose to delete before they are written away or continue shooting.

Aperture priority mode, note the aperture displayed at the bottom of the screen, use the left and right arrows on the 4-way controller to select an aperture (only two available at any focal length).

Manual exposure mode, here we can set both shutter speed and aperture, same controls as for aperture priority, use the exposure compensation button to switch between shutter speed and aperture.


Other record mode displays

Full auto exposure mode. Movie record mode, note the vertically distorted image.


Play display

Switching to play mode immediately displays the last image taken. Image display is very rapid, the camera must be using a small thumbnail in the image header. Use the left and right arrows on the 4-way controller to browse through images. Pushing the 4-way controller up displays additional exposure information: Shutter speed, Aperture, White balance, ISO sensitivity, Exposure Compensation, Folder name, Filename.
Pressing the QV/delete button in play mode displays this delete confirmation prompt. Pressing the magnify button magnifies the image in three steps: x2.0, x2.5, x3.2. Once magnified you can pan around the image using the 4-way controller.
Pressing the Display information button twice switches to a thumbnail display which can be configured to either 4 (2x2) or 9 (3x3) images.
A similar thumbnail view is also used to mark images for protection / deletion / print order.
Previous page Next page
1
I own it
0
I want it
4
I had it
Discuss in the forums

Comments