You can choose for the M8 to display a review of the image taken immediately after shutter release, if enabled you can set the display duration (1 to 5 seconds) and the display type (either single image or single image with histogram). During record review you can also press the DELETE button to quickly delete the image.
Press the PLAY button to enter Play mode, by default this shows a single image with simply the frame counter at the top right and the protect icon at the top left (if set). Press INFO to switch to the detailed information display which has a smaller version of the image, a histogram and exposure information. The histogram type can be set between brightness (luminance) or RGB and you can also optionally enable the display of clipping (enabled below, the red areas in the image). In INFO mode you can still magnify and the histogram will reference only the magnified portion [clip].
|Default display||INFO display|
From a single image view turn the command dial clockwise to enter magnify mode, use the direction buttons to move around the magnified image. The M8 provides four magnify levels, the last of which is a 1:1 representation of the image. The sequence below shows initial magnification, the area of interest moved and then two further levels of magnification.
From a single image view turn the command dial counter-clockwise to enter thumbnail index display mode, there are three levels available; 2x2 index, 3x3 index and a 3x3 index which can be paged (9 images per direction button press).
Other play displays
The DELETE button provides an option to delete the current image or all images, the PROTECT button the ability to delete protect the current image or all images, or remove protection.