Previous page Next page

Resolution Chart Comparison (JPEG and Raw)

Images on this page are of our standard resolution chart which provides for measurement of resolution up to 4000 LPH (Lines Per Picture Height). A value of 20 equates to 2000 lines per picture height. For each camera we use the relevant prime lens (the same one we use for all the other tests in a particular review). The chart is shot at a full range of apertures and the sharpest image selected. Studio light, cameras set to aperture priority (optimum aperture selected), image parameters default. Exposure compensation set to deliver approximately 80% luminance in the white areas.

What we want to show here is how well the camera is able to resolve the detail in our standard test chart compared to the theoretical maximum resolution of the sensor, which for the charts we shoot is easy to work out - it's simply the number of vertical pixels (the chart shows the number of single lines per picture height, the theoretical limit is 1 line per pixel). Beyond this limit (which when talking about line pairs is usually referred to as the Nyquist frequency) the sensor cannot faithfully record image detail and aliasing occurs.

This limit is rarely attained, because the majority of sensors are fitted with anti-aliasing filters. Anti-aliasing filters are designed to reduce unpleasant moiré effects, but in doing so, they also reduce resolution (the relative strength and quality of these filters varies from camera to camera). In theory though, a sensor without an AA filter, when coupled with a 'perfect' lens, will deliver resolution equal to its Nyquist limit. Therefore, even though it may be effectively unattainable with normal equipment in normal shooting situations, an understanding of a sensor's theoretical limit provides a useful benchmark for best possible performance. Nyquist is indicated in these crops with a red line.

On this page we're looking at both JPEG and Raw resolution. For a (more) level playing field we convert the latter using Adobe Camera Raw. Because Adobe Camera Raw applies different levels of sharpening to different cameras (this confirmed) we use the following workflow for these conversions:

  • Load Raw file into Adobe Camera Raw (Auto mode disabled)
  • Set Sharpness to 0 (all other settings default)
  • Open file to Photoshop
  • Apply a Unsharp mask tuned to the camera, here 200%, Radius 0.3, Threshold 0
  • Make 100% crops and save the original file at JPEG quality 11 for download
JPEG (4000 x 3000) 2.5MB Raw (4000 x 3000) 6.8MB

Vertical resolution

JPEG
Raw

Horizontal resolution

JPEG Raw

The Canon S100's JPEG engine is capable of pulling genuine detail out of the chart up to around 2100 lp/ph, which puts it on almost exactly the same level as the Panasonic DMC-LX5 which has a very similar number of vertical pixels. In raw mode the S100 doesn't deliver much more 'true' detail, but moiré patterning is very apparent from around 2400 lp/ph.

The processed raw likewise shows impressively fine resolution, and while there's a bit more color moire, the narrower-radius sharpening we've applied results in a cleaner image without sharpening artifacts. Overall the Canon S100's results are very good for a compact 12MP sensor, but naturally it can't quite match the resolution offered by the likes of larger interchangeable lens compacts.

Previous page Next page
263
I own it
65
I want it
52
I had it
Discuss in the forums

Comments

Sdaniella
By Sdaniella (2 months ago)

Powershot S100: 5.2-26.0mm f/2.0-5.9
Canon 71.6∠2.60 ∅ 2.0 ev (Wide)
Canon 16.4∠4.41 ∅ 5.9 ev (Tele)

0 upvotes