Previous page Next page


Record mode display

Here, an example of information overlay in Program Auto Exposure mode. Camera settings are shown down the left hand side of the display.

In this case: Flash Cancel, Single Shot, Incandescent White Balance, -0.3 EV compensation, Image Stabilisation enabled.


In this example we're already half-pressed the shutter release and are ready to shoot. Notice the green focus lock indicator, exposure displayed along with a camera shake warning (tripod / brace recommended) After shooting a preview is displayed briefly (this can be disabled or set to 2 or 10 seconds) if you press SET then * you can choose to delete the image before it is written out to the CF card.
Example of Shutter Priority mode (before half-pressing the shutter release). Example of Aperture Priority mode (before half-pressing the shutter release).


Manual Focus

Here's an example of Manual Focus, the bar graph on the right side represents the current focus position, there are in fact 30 focus points from close-up through to Infinity.


Playback display

Switching to play mode immediately displays the last image taken. Depending on the previously chosen display mode you'll either see this (clean image, no info overlaid) Basic information overlaid, folder / filename, frame number, image quality / size, date / time.
 
Detailed information overlaid, folder / filename, exposure mode, shutter speed, aperture, exposure compensation, white balance, focus mode, frame number, image quality / size, date / time.  

In Jump mode you can jump through 10 images at a time without switching to thumbnail view mode. Thumbnail view, 3 x 3 images displayed, you can use the 4-way controller to move the selector rectangle between images.
Zoom, first level (2.5x). In this view I've left the information overlay shown. Use the 4-way controller to smoothly scroll around the image. Zoom, second level (5.0x). Use the 4-way controller to smoothly scroll around the image.
Previous page Next page

Comments