Previous page Next page

FUNC Menu

Pressing the FUNC button in record mode overlays the FUNC menu over the live scene preview (black background used here for clarity).

Each setting appears in the same place as its icon. Use the up and down arrows to move through the menu and left and right to change. Some options have sub-menus which can be accessed by pressing the SET button.

FUNC Menu Options

FUNC menu Description
Options
Sensitivity  • Auto
 • ISO 50
 • ISO 100
 • ISO 200
 • ISO 400
Photo Effect  • Off
 • Vivid
 • Neutral
 • Low Sharpening
 • Sepia
 • B&W
 • Custom (SET - contrast, sharpness, saturation)
Bracketing  • Off
 • Exposure Bracketing (SET - settings)
 • Focus Bracketing (SET - settings)
Flash output  • +/- 2.0 EV in 0.3 EV steps
Image quality  • Super-fine
 • Fine
 • Normal
Image size  • L (3072 x 2304)
 • M1 (2592 x 1944)
 • M2 (2048 x 1536)
 • M3 (1600 x 1200)
 • S (640 x 480)
 • RAW

Record Menu (P, Tv, Av, M, C1, C2 modes)

Pressing the MENU button in record mode displays the camera menu, note that Canon has tweaked the menu design, the use of colored borders and the position 'scroll bar' down the right hand side. Also different is that the background is now opaque.

As you move down the menu it scrolls two options before the bottom so you can always see what option is coming.

Record Menu Options

Record menu Options Notes
Flash Sync  • 1st-curtain
 • 2nd-curtain
Controls whether the flash goes off at the beginning of the exposure (1st-curtain) or just before the end (2nd-curtain). Used for slow-sync effects.
Slow Synchro  • On
 • Off
When enabled the camera will expose flash shots as if it were without the flash, to provide a 'slow sync' effect and maintain background detail.
Red-eye  • On
 • Off
When enabled the AF lamp will remain lit as long as you half-press the shutter release.
Cont. Shooting  • Normal
 • High
- Approx. 1.2 fps
- Approx. 2.0 fps
Self-timer  • 2 sec
 • 10 sec
 
Wireless Delay  • 0 sec
 • 2 sec
 • 10 sec
 
Spot AE Point  • Center
 • AF Point
Controls whether the Spot AE point follows the AF area or is always locked to the center.
ND Filter  • On
 • Off
When enabled applies an ND8 filter between the lens and sensor
MF-Point Zoom  • On
 • Off
Choose whether focus point is magnified during manual focus
AF Mode  • Single
 • Continuous
 
AF-assist Beam  • On
 • Off
 
Digital Zoom  • On
 • Off
 
Review  • Off
 • 2 - 10 sec
 
Reverse Disp.  • On
 • Off
When set to On the camera mirrors the live view image when LCD is turned towards subject
Intervalometer  • Interval time
1 - 60 mins
 • No. of shots
2 - 100 shots
 • OK (begin)
Start a time lapse sequence of exposures, intervals of 1 to 60 mins, up to 100 shots.
Save Settings  • Destination
C1 / C2
Save current settings to one of the Custom (C1 or C2) exposure modes.

Play Menu

Pressing the MENU button in play mode overlays the play menu, again the new menu style now has an opaque gray background.

Play Menu Options

Option Values / Actions
Protect ... Enter protect mode, here you can browse through images and press the SET button to protect / unprotect each image. This can be carried out in single image or thumbnail index view.
Rotate ... Enter rotate mode, browse in the same way and press SET to rotate 90 degrees, this does not actually rotate the JPEG file but rather marks it as being rotated for display only. This can be carried out in single image or thumbnail index view.
Erase All ...
• Cancel
• OK
Slide Show ... • Show 1, Show 2, Show 3, All Images (group images into show sets)
• Play Time: 3 - 30 secs, Manual
• Repeat: On, Off
• Start
Print Order ...
(for printing on connected printer)
• DPOF order (browse mode, mark images for printing)
• Set Up: Print Type (Standard, Index, Both), Date, File No.
Transfer Order ... Enter DPOF transfer order mode, select images for transfer
Previous page Next page
15
I own it
0
I want it
40
I had it
Discuss in the forums

Comments