Camera Menus
The 500D's menus have had the same slight aesthetic reworking that we first saw on the 50D. So they look nice and fresh, but will still be instantly familiar to anyone who's used a Canon DSLR in the past few years. As is usual for Canon, there are simpler versions of the menu that are encountered when you switch away from the manual and semi-manual modes. In these simplified menus, the order of the options tends to be the same but the additional pages with more complex options have been hidden.
![]() |
![]() |
| Full menu (P, Tv, Av, M, A-DEP) | Limited menu (Auto, Creative Auto, scene modes) |
|---|
Shooting section (red)
![]() |
||
|---|---|---|
Option |
Values / Actions |
Notes |
| Quality | Large Fine Large Normal Medium Fine Medium Normal Small Fine Small Normal RAW + Large Fine RAW |
- JPEG Large = 4752 x 3168 |
| Beep | On Off |
Enables auto focus confirmation beep. Also used for self timer. |
| Release shutter without card | On Off |
Allow shot to be taken without SD card inserted. |
| Review time | Off 2 sec 4 sec 8 sec Hold |
|
| Peripheral illum. correct. | Enable Disable |
Corrects vignetting depending on the attached lens. |
| Red-eye on/off | Off On |
Enables the use of the AF / red-eye lamp just before a flash shot. |
| Flash control | Flash firing Built-in flash function setting External flash function setting External flash C.Fn setting Clear external flash C.Fn setting |
|
| Expo. comp./AEB | +/-2 EV 1/3 or 1/2 EV steps (C.Fn 1) |
Configures auto exposure bracketing. |
| Metering mode | Evaluative metering Partial metering Spot metering Center-weighted average |
|
| Custom WB | Set custom WB | Select image for custom WB. |
| WB Shift / BKT | Shift: B9-A9, M9-G9 Bracket: BA+/-3, MG+/-3 |
Configures WB shift and WB bracketing. |
| Color space | sRGB Adobe RGB |
|
| Picture Style | Standard Portrait Landscape Neutral Faithful Monochrome User Def. 1 User Def. 2 USer Def. 3 |
|
| Dust Delete Data | OK Cancel |
|
Metering mode weights
The diagram below (provided by Canon) shows the area of the frame measured in different metering modes.

Movie section (red)
The movie menu is only accessible when the mode dial is turned to movie mode.
![]() |
||
|---|---|---|
Option |
Values / Actions |
Notes |
| Grid display | Off Grid 1 Grid 2 |
|
| Metering timer | Off 2 sec 4 sec 8 sec Hold |
|
| Release shutter without card | On Off |
|
| Review time | 4 sec 16 sec 30 sec 1 min 10 min 30 min |
|
| Movie rec. size | 1920x1080 1280x720 640x480 |
|
| AF mode | Live mode Live mode with Face Detection Quick mode |
|
| Sound recording | On Off |
|
| Remote control | Disable Enable |
|
Picture Style
The picture styles are accessible via a direct button but, unlike the 50D, can only be edited and tweaked via the main menu. It's possible to configure up to three custom styles, though, either via the camera or the 'Picture Styles Utility' software that comes with the camera, and these can be selected from the direct access button.
![]() |
![]() |
Playback Section (Blue)
![]() |
|
|---|---|
Option |
Notes |
| Protect images |
Protect mode, allows you to browse images either in a single image or thumbnail view and mark each image as protected (or un-protect). This simply sets the read-only flag on the CF card file system. |
| Rotate |
Rotate mode, again, this can be performed in either single image or thumbnail index view. This option allows you to rotate an image on-screen by 90 or 270 degrees. It doesn't actually rotate the JPEG file, but marks its orientation. |
| Erase images |
Select and erase images All images in folder All images on card |
| Print order | Allows you to create a DPOF print order file, for use with compatible printers or photo finishers. Select images By folder All images Set up |
| Transfer order | Allows you to create a transfer order file, for use with automatic image transfer software. Select images By folder All images |
| Histogram | Brightness RGB |
| Slide show | Start an automated slideshow of images on the CF card, delay between each image is preset at four seconds. |
| Image jump | 1 image |
Setup Section (Yellow)
![]() |
||
|---|---|---|
Option |
Values / Actions |
Notes |
| Auto power off | 30 sec 1 min 2 min 4 min 8 min 15 min 30 min Off |
Sets camera power off time, this is the amount of "idle time" before the camera powers itself off. In the power off state the camera can be woken by half or fully depressing the shutter release (or turning the power switch to Off and back to On). |
| File numbering | Continuous Auto reset Manual reset |
Controls the numbering method used for filenames. |
| Auto rotate | On (play mode and EXIF) On (EXIF) Off |
Chooses whether orientation information is recorded and if the camera should rotate in play mode. |
| Format | OK Cancel |
Format the CF card |
| LCD auto off | Enable Disable |
|
| Screen color | 1 (Black on White) 2 (White on Black) 3 (Cream on Burgundy) 4 (Green on Black) |
|
| LCD Brightness | 1 to 7 | |
| Date/Time | Set Date & Time Set Date format |
|
| Language | English |
Select menu language. |
| Video system | NTSC PAL |
Select video system for video out connector. |
| Sensor cleaning |
Auto cleaning Clean now Clean manually |
Defines the settings for the built-in cleaning system, by default the system is enabled and cleans at startup and shutdown (although can be interrupted). The 'clean manually' option locks the mirror and shutter up. |
| Live View function settings |
Live View shooting |
Defines parameters for Live View. |
| Custom Functions (C.Fn) | Enters C.Fn menu | |
| Clear settings | Clear all camera settings Clear all Custom Func. (C.Fn) Delete copyright information Cancel |
|
| Firmware | Select to load new firmware from CF card | Also shows current version, on our camera; 2.9.1 41 (1a) |














