Camera Menus
 |
The 1000D's menus are vitually identical to those of the 450D, giving a good impression of how many of the features of the more expensive model have been retained. |
|---|
Shooting menu 1
 |
||
|---|---|---|
| Option | Values / Actions | Notes |
| Quality [Example] | • Large / Fine • Large / Normal • Medium / Fine • Medium / Normal • Small / Fine • Small / Normal • RAW + Large / Fine • RAW |
- 3888 x 2592 JPEG |
| Red-eye on/off | • Off • On |
Enables the use of the AF / red-eye lamp just before a flash shot. |
| Beep | • On • Off |
|
| Shoot w/o card | • On • Off |
|
| Review time | • Off • 2 sec • 4 sec • 8 sec • Hold |
If this option is set to Hold then the image is displayed until the shutter release is half-pressed. |
Shooting menu 2
This menu is displayed only in the P, TV, Av, M or A-DEP modes, not in any of the 'Basic Zone' modes (such as full Auto or the Scene modes).
 |
||
|---|---|---|
| Option | Values / Actions | Notes |
| Auto Exposure Bracket | • 0 to +/-2.0 EV in 0.3 EV steps | AE Comp. button and dial configure auto exposure bracketing steps [Clip] |
| Flash exposure compensation | • +2.0 to -2.0 EV in 0.3 EV steps | |
| Custom WB | • Set custom WB | Select image for custom WB |
| WB Shift / BKT | • Shift: B9-A9, M9-G9 • Bracket: BA+/-3, MG+/-3 |
Configures WB shift and WB bracketing. [Example] |
| Color space | • sRGB • Adobe RGB |
|
| Picture Style | • Standard (3, 0, 0, 0)  Parameters• Portrait (2, 0, 0, 0) Parameters• Landscape (4, 0, 0, 0) Parameters• Neutral (0, 0, 0, 0) Parameters• Faithful (0, 0, 0, 0) Parameters• Monochrome (3, 0, N, N) Parameters• User Def. 1  Picture Style (any of the above) Parameters• User Def. 2 Picture Style (any of the above) Parameters• User Def. 3 Picture Style (any of the above) Parameters |
Values shown in brackets represent the default setting for each picture style (Sharpness, Contrast, Saturation, Color tone), for Monochrome (Sharpness, Contrast, Filter effect, Toning effect). [Example] For Parameter options see table below. |
| Dust delete data | • Cancel • OK |
Allows you to capture an image for dust subtraction later. |
Picture Style parameters
 |
||
|---|---|---|
| Parameter | Values | Notes |
| Sharpness | • 0 to 7 |
|
| Contrast | • -4 to +4 | |
| Saturation | • -4 to +4 | Not monochrome |
| Color tone | • -4 to +4 | Not monochrome |
| Filter effect | • None • Yellow • Orange • Red • Green |
Monochrome only |
| Toning effect | • None • Sepia • Blue • Purple • Green |
Monochrome only |
Play menu
 |
||
|---|---|---|
| Option | Values / Actions | Notes |
| Protect | Enter protect mode, allows you to browse images either in a single image or thumbnail view and mark each image as protected (or un-protect). This simply sets the read-only flag on the SD card file system. | |
| Rotate | Enter rotate mode, again, this can be performed in either single image or thumbnail index view. This option allows you to rotate an image on-screen by 90 or 270 degrees. Doesn't actually rotate the JPEG file, but marks its orientation. | |
| Erase images | • Select and erase images • All images on card |
|
| Print Order | Allows you to create a DPOF print order file, this defines which images will be printed, how many copies of each, what format etc. For use with compatible printers or photo finishers. • Select images • All images • Setup |
|
| Transfer Order | Allows you this select which images will be transferred using compatible computer based transfer software. • Select images • All images |
|
| Histogram | • Brightness |
|
| Auto Play | Start an automated slideshow of images on the SD card, delay between each image is preset at four seconds. | |
