ConnectionsThe D700's connections are in two places, either at the front top right (remote and flash PC sync) or the left side of the body (from the rear). The remote (which also allows for serial GPS) and flash PC sync terminals are protected by a rubber cover which is itself attached to the strap eyelet. On the side are the largest group of connectors, from top to bottom; HDMI (digital video out HD/SD), Video out (composite), USB 2.0 and DC-IN. When using HDMI output you can select five different output options; Auto, 480p, 576p, 720p or 1080i. For an example and video clip of HDMI output see this page of our D300 article.
Camera Base / Tripod MountFlashUnusually for a professional Nikon (in fact unusual for a professional camera, full stop), the D700 has a small pop-up built-in flash. The flash is released manually by pressing a small button on the left side just below the flash. The long arm raises the flash unit a respectable distance above the top of the lens (useful for lens hoods and reducing red-eye). Just below the release button is another button which changes flash mode and flash exposure compensation control button. Hold the button and turn the main command dial (rear) to change flash mode, sub-command dial to change flash exposure compensation (-3.0 to +1.0 EV). Lens Mount / SensorBelow on the left you can see the D700's lens mount with the mirror down, on the right with mirror up and shutter open (exposing the sensor). Lenses are inserted twisted clockwise and lock in place with an anticlockwise turn. This is a standard Nikon F lens mount and can use almost the complete range of Nikkor F lenses (although some features are only available with newer type G or type D lenses). The D700 supports the aperture ring found on older AI lenses. Despite being full-frame it also supports 1.5x crop DX format lenses automatically and masks the viewfinder view accordingly (see earlier in this article).
Self-cleaning sensor unitThe D700 trumps the D3 in one area; it has the same automatic sensor cleaning system as found on the D300. It works in the same manner as other implementations, piezoelectric elements vibrate a cover filter which should in theory remove any light dust particles attached to it. Supplied In the BoxBox contents may vary by region:
|
| Bookmark: | ||||
| Actions: | < Previous | Next > | Print page |
Please wait, fetching latest prices.









