| Option |
Values / Actions |
Notes |
| Page one |
| Priority setup |
• AF
• Release |
Choose whether the camera will release the shutter without focus lock
|
| Focus Hold button |
• Focus hold
• DOF preview |
|
| AF/MF button |
• Hold
• Toggle |
Choose if the AF/MF button must be held or toggles focusing mode |
| AEL button |
• AE hold
• AE toggle
• Spot AE hold
• Spot AE toggle |
Choose if the AEL button must be held or toggles AE lock, additionally this can be set to spot meter instead |
| AF w/ shutter |
• On
• Off |
|
| Auto AF setup |
• Auto AF
• DMF |
Select the function of the 'A' position on the AF switch |
| Page two |
| Control dial setup |
• Front shutter, Rear aperture
• Front aperture, Rear shutter |
Switch the function of the front and rear control dials for exposure |
| Exposure compen. |
• Off
• Front control dial
• Rear control dial |
If enabled allows adjustment of exposure compensation by a turn of the specified dial |
| Control dial lock |
• On
• Off |
When set to On the dials have no function unless an exposure is shown |
| Exposure compen. set |
• Ambient& Flash
• Ambient only |
- EV and flash exp. comp. can be set
- Only EV exp. comp. can be set
|
| AF illuminator |
• On
• Off |
|
| Page three |
| Shutter lock |
• On
• Off |
When set to On the shutter can not be released when no lens is attached |
| AF area setup |
• 0.3 sec display
• 0.6 sec display
• Display off |
Controls how long the selected AF area is illuminated in the viewfinder |
| Monitor display |
• Automatic
• Manual |
When set to Auto the eye sensors are used to switch off the LCD |
| Recording display |
• Auto rotate
• Horizontal |
Controls whether the recording information display is rotated or not |
| AS finder display |
• On
• Off |
Allows you to disable the Anti-Shake scale in the viewfinder |
| Page four |
| ISO button set |
• ISO
• Zone Matching |
Control ISO or Zone Matching with the ISO button * |
| ISO menu setup |
• 100 - 1600
• 100 - 3200 |
Enables the extended sensitivity of ISO 3200
|
| Mset button |
• Memory
• Menu shortcut |
Set the function of the Mset button |
| Custom reset |
• Enter
Yes
No |
Reset just the custom settings
|
From the 7D manual: "When selected, an indicator is displayed on the monitor.
The camera sensitivity is fixed at ISO 250 for high and ISO
100 for low. The color mode is fixed at Natural. Contrast
cannot be changed with the Digital Effect Control.
A high-key scene is made up of predominately light tones
and colors. A low-key scene is made up of dark tones and
colors. Zone Matching controls exposure and contrast to
improve reproduction of these scenes."