The EOS-1Ds Mark II has 20 custom functions and 26 personal functions. Custom and personal functions can be 'registered' into one of three 'custom function groups', the idea being that you can instantly switch between different sets of custom / personal functions for different situations or photographers. (Note that to remain consistent with previous EOS-1D cameras certain custom and personal function numbers do not exist in the menu).
Custom functions can be set directly via the camera's C.Fn/P.Fn Menu. Personal Functions can only be enabled / disabled (turned ON or OFF), you can not change the value of a Personal Function in-camera, this must be carried out via the supplied Canon EOS Viewer Utility with the camera connected to a computer.
| C.Fn |
Description |
Options |
| 01 |
Finder display during exposure
Controls if exposure information and remaining buffer space is displayed during continuous shooting. |
• 0 - No viewfinder display
• 1 - Finder display on
|
| 02 |
Shutter release without card
Disable the shutter button if there is no card inserted |
• 0 - Possible without card
• 1 - Not possible |
| 04 |
Shutter button / AE lock button
Controls the function of the shutter release and AE lock buttons |
• 0 - AF / AE lock
• 1 - AE lock / AF
• 2 - AF / AF Lock, no AE lock
• 3 - AE / AF, no AE lock |
| 05 |
Manual TV/AV set for M exposure
Select which controls set either shutter speed or aperture in manual exposure mode. Also changes the way auto bracketing is executed.
|
• 0 - Tv = main, Av = quick
• 1 - Tv= quick, Av = main
• 2 - Tv= main, Av = quick w/o lens
• 3 - Tv = quick, Av = main w/o lens |
| 06 |
Exposure level increments
Select either third, half or full stop increments for shutter speed, aperture and exposure compensation |
• 0 - 1/3-stop set, 1/3-stop compen.
• 1 - 1-stop set, 1/3-stop compen.
• 2 - 1/2-stop set, 1/2-stop compen. |
| 07 |
USM lens electronic MF
Allows you to control manual focusing on certain USM lenses |
• 0 - Turns on after one-shot AF
• 1 - Turns off after one-shot AF
• 2 - Always turned off |
| 08 |
Top LCD panel / Back LCD panel
Controls what information is displayed on the top and back LCD panels |
• 0 - Remaining shots / File number
• 1 - ISO / Remaining shots
• 2 - ISO / File number
• 3 - Shots in folder / Remaining shots |
| 09 |
Auto bracketing sequence / cancel
Alter the AEB sequence. If Auto cancellation is selected bracketing will be cancelled if lens is changed or camera is powered off |
• 0 - 0,-,+ / Auto cancellation
• 1 - 0,-,+ / No cancellation
• 2 - -,0,+ / Auto cancellation
• 3 - -,0,+ / No cancellation |
| 10 |
AF point illumination
Controls the way the AF points are superimposed on the viewfinder focus screen |
• 0 - On
• 1 - Off
• 2 - On without dimming
• 3 - Brighter |
| 11 |
AF point selection method
Set the button / dial control combinations used to select AF points |
• 0 - AF point + main / quick dial
• 1 - Exp. compen + main / quick dial
• 2 - Assist + main / quick dial alone
• 3 - FEL button + main / quick dial |
| 12 |
Mirror lockup
Lock mirror up before main exposure, used to reduce vibration for long telephoto or macro shots. When enabled two presses of shutter release are required (or one with self timer).
|
• 0 - Disable
• 1 - Enable |
| 13 |
Number of AF points / Spot metering
Set the number of selectable AF points and if spot metering follows the active AF point or is locked at the center of the viewfinder |
• 0 - 45 / Center AF point
• 1 - 11 / Active AF point
• 2 - 11 / Center AF point
• 3 - 9 / Active AF point |
| 14 |
E-TTL II
If set to Average the flash exposure is averaged over the Area AF ellipse |
• 0 - Evaluative
• 1 - Average |
| 15 |
Shutter curtain synchronization
Allows you to control where in the exposure the flash fires in a slow sync flash shot |
• 0 - 1st-curtain sync
• 1 - 2nd-curtain sync |
| 16 |
Safety shift in Av or Tv
If a subjects brightness suddenly changes and the current Av or Tv setting is unsuitable the camera will automatically change the setting to obtain a correct exposure
|
• 0 - Disable
• 1 - Enable |
| 17 |
AF point activation area
Expands the active AF point either by one point or two points around the selected AF point |
• 0 - Single AF point
• 1 - Expand 7 AF points
• 2 - Automatic expand (max 13 AF points) |
| 18 |
Switch to registered AF point
Defines what button combination must be pressed to return the AF point to a previously registered AF point |
• 0 - Assist + AF point button
• 1 - Assist button
• 2 - Only while pressing Assist button |
| 19 |
Lens AF stop button function
Controls the function of the AF button on certain AF lenses |
• 0 - AF stop
• 1 - AF start
• 2 - AE lock while metering
• 3 - AF point, MF - Auto, AF - Center
• 4 - AF mode: one shot <-> AI servo
• 5 - IS start |
| 20 |
AI servo tracking sensitivity
Sets the AI servo tracking speed, setting to slow can prevent it from being thrown off by obstructions passing between the camera and the subject
|
• 0 - Standard
• 1 - Slow
• 2 - Moderately slow
• 3 - Moderately fast
• 4 - Fast |
| 00 |
Focusing Screen |
• 0 - Ec-N,R
• 1 - EC-A,B,C,CII,CIII,D,H,I,L (default) |
Personal functions are set through the Canon EOS Viewer Utility when the camera is connected to a computer. Once a personal function has been set it can be enabled / disabled from the camera.
| P.Fn |
Description |
Options |
| 01 |
Disable shooting modes
Allows you to disable any combination of the modes shown here * |
• Disable program AE
• Disable shutter-priority AE
• Disable aperture-priority AE
• Disable bulb exposure
• Disable manual exposure |
| 02 |
Disable metering modes
Allows you to disable any combination of metering modes shown here * |
• Disable evaluative metering
• Disable partial metering
• Disable spot metering
• Disable center-weighted average metering |
| 03 |
Specify metering mode for manual exposure |
• Evaluative
• Partial metering
• Spot metering
• Center-weighted average metering |
| 04 |
Set maximum and minimum shutter speeds |
• Maximum - any up to 1/8000 sec
• Minimum - any down to 30 sec |
| 05 |
Set maximum and minimum apertures |
• Maximum - any down to F91
• Minimum - any up to F1 |
| 06 |
Registers and switches the shooting and metering mode |
• Off
• On |
| 07 |
Repeats bracketing during continuous shooting |
• Off
• On |
| 08 |
Set number of shots to be bracketed |
• 2
• 3
• 5
• 7 |
| 09 |
Change the bracketing sequence for C.Fn 9 2/3 to increased, standard, decreased |
• Off
• On |
| 10 |
Retains the shift amount for program shift |
• Off
• On |
| 14 |
Disables focus detection (search driving) by the lens drive |
• Off
• On |
| 15 |
Disables the AF-assist beam from being emitted (by connected flash) |
• Off
• On |
| 16 |
Enables automatic shooting when focus is achieved at the fixed point of focus when the shutter button is pressed fully |
• Off
• On |
| 17 |
Disables automatic AF point selection |
• Off
• On |
| 18 |
Enables automatic AF point selection when C.Fn 11-2 has been set |
• Off
• On |
| 19 |
Sets continuous shooting speed |
4, 3, 2, 1 fps |
| 20 |
Limits number of shots during continuous shooting |
Numeric |
| 21 |
Enables silent operation when the shutter button is OFF after picture taking |
• Off
• On |
| 23 |
Change timers length * |
• 6 sec Timer
• 16 sec Timer
• Post-shutter release timer: 2 sec |
| 24 |
Illuminate the LCD panels during Bulb exposure |
• Off
• On |
| 25 |
Set default settings for camera reset |
(Various settings) |
| 26 |
Shortened shutter release time lag |
• Off
• On |
| 27 |
Reverse direction of dials |
• Off
• Main dial
• Quick control dial
• Both dials |
| 28 |
Prevent exposure compensation with quick control dial |
• Off
• On |
| 30 |
Quick Control on/off switch affects Main Dial too |
• Off
• On |
| 31 |
Add original decision data
(adds digital 'signature' to image for use with data verification kit) |
• Off
• On |
Digg
del.icio.us
Reddit
Google
Please wait, fetching latest prices.