 |
Option |
Values |
| I-1: Exposure level increments |
0: 1/3 stop
1: 1/2 stop |
| I-2: ISO speed setting increments |
0: 1/3 stop
1: 1 stop |
| I-3: ISO Speed Range |
Highest ISO speed (100-3200/H)
Lowest ISO speed (L/50-1600) |
| I-4: Bracketing auto cancel |
0: On
1: Off |
| I-5: Exposure Bracketing sequence |
0: 0, -, +
1: -, 0, + |
| I-6 Number of Bracketed shots |
0: 3 shots
1: 2 shots
2: 5 shots
3: 7 shots |
| I-7 Spot meter. link to AF point |
0: Disable (use center AF point)
1: Enable (use active AF point) |
| I-8: Exposure Safety shift |
0: Disable
1: Enable (Tv/Av)
2: Enable (ISO speed) |
| I-9: Select usable shooting modes |
Manual, P, Tv, Av, Bulb On/Off |
| I-10: Select usable metering modes |
Eval, Center Weighted, Spot, Average On/Off |
| I-11: Exposure mode in manual expo. |
0: Specified metering mode
1: Evaluative Metering
2: Partial Metering
3: Spot Metering
4: Center-weighted average |
| I-12: Set shutter speed range |
Highest Speed: 1/250 to 1/8000
Lowest Speed: 30 secs to 1/60th |
| I-13: Set aperture value range |
Min aperture value (Max. f/): 1.4 - 91
Max. aperture (Min. f/): 1.0-64 |
| I-14: Apply shooting/metering mode |
0: With AE lock button (AF on)
1: With AE lock button (AF off) |
| I-15: Flash sync. speed in Av mode |
0: Auto
1: 1/250 sec (fixed) |
 |
Option |
Values |
| II-1: Image Long exp. noise reduction |
0: Off
1: Auto
2: On |
| II-2: High ISO speed noise reduction |
0: Off
1: On |
| II-3: Image Highlight tone priority |
0: Disable
1: Enable |
| II-4: E-TTL II flash metering |
0: Evaluative flash metering
1: Average flash metering |
| II-5: Shutter curtain sync. |
0: 1st-curtain synchronization
1: 2nd-curtain synchronization |
| II-6: Flash firing |
0: Enable
1: Disable |
| II-7: Viewfinder info. during exp |
0: Disable
1: Enable |
| II-8: LCD panel illumi. during bulb |
0: Off
1: On during bulb |
| II-9: Info button when shooting |
0: Displays camera settings
1: Displays shooting settings |
 |
Option |
Values |
| III-1: USM lens electronic MF |
0: Enable after One-shot AF
1: Disable after One-shot AF
2: Disable in AF mode |
| III-2: Servo tracking sensitivity |
Slow - Fast (5 steps) |
| III-3: AI Servo 1st/2nd img. priority |
0: AF priority/Tracking priority
1: AF priority/Drive speed priority
2: Release/Drive speed priority |
| III-4: AI Servo AF tracking method |
0: Main focus point priority
1: Continuous AF track priority |
| III-5: Lens drive when AF impossible |
0: Focus search on
1: Focus search off |
| III-6: Lens AF stop button function |
0: AF stop
1: AF start
2: AE lock
3: AF point: M->Auto / Auto->Ctr
4: One Shot <-> AI Servo
5: IS start
6: Switch to registered AF point |
| III-7: AF Microadjustment |
0: Disable
1: Adjust all by same amount
2: Adjust by lens |
| III-8: AF expansion w/selected pt |
0: Disable
1: Enable (left/right Assist pts)
2: Enable (surrounding Assist p) |
| III-9: Selectable AF point |
0: 19 points
1: Inner 9 points
2: Outer 9 points
3: 19 points with manual selection
4: Inner 9 points with manual selection
4: Outer 9 points with manual selection |
| III-10: Switch to registered AF point |
0: Disable
1: Enable |
| III-11: AF point auto selection |
0: rear dial direct: disable/front: enable
1: rear dial direct: disable/front: disable
2: rear dial direct: enable/front: enable |
| III-12: AF point display during focus |
0: on
1: off
2: On (when focus achieved) |
| III-13: AF point brightness |
0: Normal
1: Brighter |
| III-14: AF-assist beam firing |
0: Enable
1: Disable
2: Only external flash emits |
| III-15: Mirror lockup |
0: Disable
1: Enable
2: Enable: Down with SET |
| III-16: Continuous shooting speed |
High Speed: 2,3,4 or 5 fps
Low Speed: 1,2,3 or 4 fps |
| III-17: Limit continuous shot count |
2-99 shots |
 |
Option |
Values |
| IV-1: Shutter button / AF-ON button |
0: Metering + AF start
1: Metering + AF start / AF stop
2: Metering start / Meter+AF start
3: AE lock / Metering + AF start
4: Metering + AF start / disable |
| IV-2: AF-ON / AE lock button switch |
0: Disable
1: Enable |
| IV-3: Quick control dial in meter. |
0: Exposure comp./Aperture
1: AF point selection
2: ISO speed
3: AF point selection/AE-comp button swap
4: ISO speed/AE-Comp button swap |
IV-4: SET button when shooting
(only when Live View is disabled) |
0: Normal (disabled)
1: White Balance
2: Image Size
3: ISO speed
4: Change Picture Style
5: Record func. + media/folder
6: Menu display
7: Image replay |
| IV-5: Tv/Av setting for manual exp. |
0: Front dial Tv, Rear dial Av
1: Front dial Av, Rear dial Tv |
| IV-6: Dial direction during Tv/Av |
0: Normal
1: Reverse direction |
| IV-7: Av setting without lens |
0: Disable
1: Enable |
| IV-8: WB + media size settings |
0: Real LCD panel
1: LCD monitor |
| IV-9: lock/audio button function |
0: Protect (hold down for sound rec).
1: Sound rec (protect: disable) |
| IV-10: Button function when rear dial off |
0: Normal (enable)
1: Disable front dial, rear dial and multi controller. |
| IV-5: Focusing Screen |
0: L Ec-CIV
1: L Ec-A, B, C, CII, CIII, D, H, I L
2: P Ec-S
3: N Ec-N, R |
| IV-12: Timer length for timer |
6 sec timer: 0 secs to 60 mins
16 sec timer: 0 secs to 60 mins
Timer after release: 0 secs to 60 mins |
| IV-13: Shortened release lag time |
0: Disable
1: Enable |
| IV-14: Add aspect ratio information |
0: Off
1: Aspect Ratio 6:6
2: Aspect Ratio 3:4
3: Aspect Ratio 4:5
4: Aspect Ratio 6:7
5: Aspect Ratio 10:12
6: Aspect Ratio 5:7 |
| IV-15: Add original decision data |
0: Off
1: On |
| IV-7: Live View exposure simulation |
0: Disable (LCD auto adjust)
1: Enable (simulates exposure) |
The new 'My Menu' feature (found on most current EOS models) on the EOS-1DS Mark III allows you to produce a custom menu made up of any of the cameras menu options (including custom functions) which means that previously buried but useful options such as Mirror lockup can now be brought to a top level menu.
Digg
del.icio.us
Reddit
Google
Please wait, fetching latest prices.