Panasonic Lumix DMC-TS1 (Lumix DMC-FT1)
Announced Jan 27, 2009 •
12 megapixels | 2.7″ screen | 28 – 128 mm (4.6×)
Ask a question in forums about the Panasonic Lumix DMC-TS1 (Lumix DMC-FT1).
Ask a new question
Hi I am just testing the J5 with the Nikon FT! adaptor. I tried now my Nikkor 35/1.8G ED on it. AF works (although slow), but surprisingly the ISO setting is too high. I have ISO Auto 6400 enabled, A mode (F1.8) and a resilting shutter speed of 1/200s with ISO 1600. So instead of lowering the shutterspeed to get better image quality with lower ISO, it sticks always at ISO 1600. Also with other shutterspeeds. How can this be?
I have a Nikon V1 that I recently updated to firmware 1.40. Now I want to buy a new Ft 1 adapter to use my Nikon Afs 300 mm f4 D. Will this combo work without getting problems with the firmware on the Ft1? I searched the forum but I'm not sure. Another question is how theresults are with continuous autofocus?ThanksRaafje
Just wondering if anyone's done this. I can't fit my Tamron 24-70mm F/2.8 VC onto the FT1 because of the bump with the switches on the lens hits the extended part of the foot. Annoying, since I was thinking of getting a Tamron 70-300mm VC, as well, and I know it will have the same issue...
Hi has an aybody used the new 300mm PF lens with the FT1 on a V2/3 camera .Iam considering adding this lens to my FF system with a view to using it also on my V2.I am especially interested in its wide open performance and AF speed as i would want to use it to compliment my 70 300 cx lens.
The tripod mounting plate on the Nikon VR 1 80-200 f2.8 lens seems smaller in size then the tripod mount plate which comes on the latest model VR ll 80-200 f2.8 lens. Does anyone here know if these parts are interchangeable? In other words can the older smaller, more compact plate design fit on the newer model lens. Thanks. Having shot with the FT1 adapter Nikon 1 V3 and VR 1 lens, it was a more compact fit on my small monopod, than what I have seen in photos of the larger tripod/monopod...
I heard of others using a non-nikon lens converter in the manual mode on a V1 so I went out and bought an inexpensive one just to play with using my DX lens. Well so far I can not find a way to make it work. I have since heard of chipped adaptors?? I'm not ready yet to pay the cost of the camera to get an FT1. Any words of wisdom here. Is there a workaround?
should the little red light just below the shutter speed dial on the konica ft 1 be on all the time , even with the camera shut off ? it has film in it; looked in the manual , but couldn't find anything other than that little light indicates film is rewinding , or something like that. not if it stays on . otherwise camera seems to working correctly . thanks .
I have tried my V2 with my FT1 + 70-300 VR FX lens and it wont lock focus past 200mm, I noticed it is worse with lower light. I couldn't find any notes if firmware updates will help with this, I currently have version 1 firmware for my V2 and FT-1. It's not really a big deal but I was curious if I was doing something wrong.