News tagged with "richard-franiec"
|Total: 8, showing: 1 – 8|
Accessory grip maker Richard Franiec has created a custom grip for the Panasonic Lumix DMC-GM1. The grip is made from anodized aluminium alloy and should improve handling when using the GM1 with larger Micro Four Thirds lens. It weighs about 20g and leaves the battery/card door and tripod socket unobstructed. It should be available later this month and cost $34.95 plus shipping. Learn more
Accessory grip maker Richard Franiec has created a custom grip for the Sigma DP1 Merrill and DP2 Merrill. As usual, the grip is made from anodized aluminium alloy and attached to the front of the camera using high-strength 3M double-sided tape. The grip attaches securely but can be removed if necessary. It will be available from December 2012 at a cost of $36.95 plus shipping.
Accessory maker Richard Franiec has unveiled his design for a custom grip for the Sony RX100. As usual for one of Franiec's grips, the anodized aluminium accessory is held in place with 3M VHB tape, which holds it firmly in place but can be removed, without damage, later. The design follows the pattern of his existing grips and doesn't protrude beyond the camera's retracted lens barrel, so that pocketability isn't reduced. The grip will be available from August 2012 at a cost of $34.95, plus shipping.
Accessory maker Richard Franiec has announced a clip-on cable-release mount for the Samsung NX200. The NX200 has no infrared or USB cable release option, so Franiec has created an arm that extends from the hot shoe to the shutter button and adds a thread to screw in a traditional mechanical cable release. The mount, made from the engineering polymer Delrin, will cost $19.95.
Richard Franiec has announced a custom grip for the Nikon 1 V1, adding to the one already available for the J1. The V1 grip slots over the ridge on the camera's front plate, to offer a more substantial surface to hold on to. Unlike Franiec's previous grips, the V1 grip extends across the camera's front and has the camera series '1' etched into it. The grip will be available in the second-half of March 2012 at a cost of $34.95, plus shipping.
Accessory grip maker Richard Franiec has announced an add-on grip for the Canon PowerShot S100. The grip differs from his existing wrap-around designs to avoid blocking the port door on the side of the camera. Instead the raised, textured design mounts on the front plate of the camera, over its existing hand-grip. The accessory will be available from late November at a cost of $29.95, plus shipping.
Accessory grip maker Richard Franiec has announced he is developing a grip for the Olympus PEN Lite (E-PL3). The grip closely mimics the designs he already makes for the Canon S90/S95, Olympus XZ-1, Leica D-Lux 4 and 5, and the Sigma DP series. The anodized aluminium grip attaches to the front of the camera using industrial-grade adhesive tape and provides a hand hold very similar to the one offered by the Panasonic GF2 and GF3. The first batch of grips will be available from mid-September at a cost of $34.95 plus shipping.
|Total: 8, showing: 1 – 8|