|Previous news story Next news story|
Kodak's TRUESENSE offers hope for cramped chips
Kodak has announced a new sensor which promises to improve the efficiency of CMOS designs with extremely small photosites. The new technology is to be offered initially in 1/4" format suitable for mobile phone cameras but should be scalable to larger formats should the concept prove successful. Conventional designs count electrons which are generated when light hits the silicon from which they are constructed but this new chip works in roughly the opposite fashion, reversing the 'polarity' of the silicon in order to measure the 'holes' which remain when electrons are generated. The Kodak KAC-05020 also incorporates Kodak's TRUESENSE Color Filter Pattern which adds panchromatic (transparent) filters to the usual Red Green and Blue, further improving luminance sensitivity.
Having spoken to Kodak regarding the TRUESENSE CMOS Pixel, we have added a short editorial to further explain the workings of this new sensor technology.
Kodak used PMA to announce a novel sensor technology that could offer cleaner high-ISO images. Although initially aimed at the cell phone camera market the technology is scalable to the digicam and DSLR markets, the company says. Most of the benefits appear to be most relevant at the very small, cell phone camera scale but it does appear to be an interesting new way of doing things.
The sensor differs from conventional sensors in two ways: firstly it uses Kodak's "High ISO color filter array," which the company announced in late 2007. In addition, the detector layer of the chip works the opposite way 'round from existing sensors in that it detects the holes left by electrons, rather than the electrons themselves. This is achieved by using a pMOS, rather than nMOS layer to do the detection.
Kodak has reported that this hole-counting technology reduces crosstalk between adjacent pixels by three to four times. This is thought to be because the holes are less mobile than electrons and cannot jump to adjacent pixels (the remaining crosstalk is thought to be due to light spilling between pixels, rather than the holes). Dark current (essentially the background noise generated by the sensor itself) is reduced by more than 30 times - a benefit that comes from the differing chemistry of pMOS-based pixels. Pixel temporal noise, the randomly occurring noise that builds up over the time the sensor is active, is reduced by around 40%.
Kodak's sensor combines this hole-counting technology with its "High ISO CFA" (Color filter array), that includes clear, luminance-detecting, pixels as well as the red, green and blue-detecting ones used in traditional Bayer-pattern filters. Internal tests suggest this color filter array produces the same signal-noise ratio at sensitivity levels around 1.6-1.7 stops higher than those using Bayer pattern filters. This may not sound much but it means a High ISO CFA chip would produce the same amount of noise at around ISO 1270 as a conventional sensor would be expected to at ISO 400.
Using the pMOS detection layer may boost this figure by between 10 and 15 percent, says Fas Mosleh, Director Worldwide Marketing and Business Development at Kodak, resulting in around a 2-stop improvement overall depending upon the pixel design and size. This means ISO 1600 performance with the amount of noise you'd usually expect to see at ISO 400. However, these are the improvements offered in the tiny 1/4" and 1/3.2" sensors used in cell phone cameras. The benefits will not be so pronounced for larger sensors, says Mosleh. It could allow larger sensors to become more pixel-dense without a loss of quality, though.
A CMOS chip with a pMOS detector layer is fabricated using the same processes as existing CMOS sensors, so would not require any fundamental re-tooling to put into large-scale production.
Kodak Revolutionizes Image Capture with New High-Resolution CMOS Image Sensor
ROCHESTER, N.Y., Feb. 4 -- Eastman Kodak Company (NYSE:EK) is enabling a new level of performance in consumer imaging devices by redesigning the basic building blocks used to collect light and is incorporating that technology into a brand-new sensor.
The company has combined its recently announced Color Filter Pattern technology with a new CMOS pixel to create the KODAK KAC-05020 Image Sensor, the world’s first 1.4 micron, 5 megapixel device. Designed for mass-consumer camera applications such as mobile phones, Kodak’s new sensor enables a new level of resolution in small optical formats, using significantly smaller pixels. But unlike other small-pixel sensors which can produce poor images, especially under low light conditions, the 1.4 micron pixel used in the KAC-05020 Image Sensor changes this convention, providing image quality that can equal or surpass what is available from current devices using larger, 1.75 micron pixel CMOS designs.
“Camera phones and other small-pixel consumer imaging devices often suffer from poor performance, especially under low light conditions. To manufacture sensors that utilize these very small pixels – only two to three times the wavelength of visible light – we needed to challenge everything we knew about pixel and sensor design,” said Chris McNiffe, General Manager of Kodak’s Image Sensor Solutions business. “By completely rethinking the design of the CMOS pixel and leveraging our work with high sensitivity color filter patterns and algorithms, Kodak was able to develop this remarkable new sensor that will enable a level of imaging performance previously unavailable from CMOS devices.”
Key to the performance of this new sensor is the KODAK TRUESENSE CMOS Pixel, a re-engineering of the fundamental design and architecture of traditional CMOS pixels. In a standard CMOS pixel, signal is measured by detecting electrons that are generated when light interacts with the surface of the sensor. As more light strikes the sensor, more electrons are generated, resulting in a higher signal at each pixel. In the KODAK TRUESENSE CMOS Pixel, however, the underlying “polarity” of the silicon is reversed, so that the absence of electrons is used to detect a signal. This change enabled a series of improvements to the design and structure of the pixel that ultimately results in CMOS imaging performance that rivals that available from CCD image sensors.
Light sensitivity in the new sensor is enhanced through the use of the recently announced KODAK TRUESENSE Color Filter Pattern, which adds panchromatic, or “clear,” pixels to the red, green and blue pixels already on the sensor. Since these pixels are sensitive to all wavelengths of visible light, they collect a significantly higher proportion of the light striking the sensor. This provides a 2x to 4x increase in sensitivity to light (from one to two photographic stops) compared to current sensor designs, improving performance in low light and reducing motion blur in action shots.
At 5 million pixels, the KAC-05020 provides the highest resolution available in the popular ¼” optical format, and enables imagery up to ISO 3200 and support for full 720p video at 30 fps. The sensor is also supported by the Texas Instruments’ OMAPTM and OMAP-DM solutions, enabling a host of KODAK Image Processing and Enhancement Features (such as digital image stabilization, rapid auto-focus, red-eye reduction, and facial recognition) that provide digital camera-like performance in a camera phone.
“For consumers today, high resolution is required but no longer sufficient,” said Fas Mosleh, Worldwide Director of CIS Marketing and Business Development for Kodak’s Image Sensor Solutions business. “Smaller and thinner camera phones, high performance under low light, and superior video performance are the types of features that will enable the next generation of consumer imaging devices. And with this new Kodak sensor, camera designers can now put those features directly into the hands of their customers.”
The new sensor expands Kodak’s portfolio of CMOS and CCD image sensors for consumer and applied imaging applications, and positions the company to take advantage of the growing demand for high-quality image capture in a variety of devices, regardless of size.
The KAC-05020 will be demonstrated by Kodak at the GSMA Mobile World Congress held Feb 11 – 14 in Barcelona, Spain. Samples of the KAC-05020 are scheduled to be available in Q2 2008.
For additional information, please contact Image Sensor Solutions, Eastman Kodak Company at (585) 722-4385 or by email at email@example.com. For more information on Kodak’s entire image sensor product line, please visit www.kodak.com/go/imagers.