Robert A

Robert A

Lives in United States Los Angeles, United States
Works as a CPA
Joined on Jul 28, 2002

Robert A's recent activity

  • Thank you.  For some reason, I thought Moab papers were not thought of so well.  I asked about them awhile ago and everyone here seemed to thing there were better options.
  • Created discussions 17 x 25 Other Than Baryta
    I was going to ask a followup question, but my question would have been drowned out. Are there other papers, besides Baryta, where the selection of 17x25 is more plentiful?  I'm thinking maybe a ...
  • Replied in 17x25 Baryta
    I don't particularly care for the 4:3 format (too much a reminder of old TV).  But if I wanted to print that way, I would capture in that format as well.
  • Replied in 17x25 Baryta
    The only rub there is that my Epson 3880 only accepts up to 17" wide paper.
  • Created discussions 17x25 Baryta
    I'm looking for a 17x25 Baryta paper that comes as close as possible to the Canson Baryta, which is my paper of choice for 13x19 and smaller sizes.  In doing a search, I see that Red River has ...
  • Did they mention any timing for replacing the 3880 with the newer generation of printers?
  • ...some idea when they expect it to come out.  Like, maybe the first half or 2015 or something like that.  Because now they have told us it is definitely coming, and have provided one critical ...
  • This is a helpful link, but I still have a basic, unanswered question. In the end, how much does it really matter if you adjust the color temperature with the monitor controls than allowing the ...
  • Again, thank you.  Would a difference of +/- 200k (say 6300-6700k) be small enough?  If I reprofile frequently, I'm trying to gauge how often I have to mess with the hardware controls.
  • Thank you for your informative reply. As to #2, the i1 Display is a measuring puck (a colorimeter?).  To rephrase my question, if the puck detects that the color temperature has drifted away from ...
  • I'm using an i1 Display and I calibrate with the Basic settings in the i1 Profiler software. I calibrate to D65, 100cdm. This is a home setup and I print to an Epson 3800. I'm being very careful ...
  • 1.  I've got a Domke F803 which seems to work rather well for travel.  However, I'm looking for movable inserts -- not the 3-part, one-piece foam insert that Domke made for the bag.  Rather, I'm ...
  • Replied in 1/32000
    What exactly is an electronic shutter anyway, how do you add it by firmware where none was there before?
  • Your comments make complete sense and I hope you're.  The only concern I have is that Fuji may have simply decided that the market for such a RF-style camera is too thin to justify the cost of ...
  • Created discussions No X-Pro 1 update this time
    I had high hopes for some sort of announcement concerning an update to the X-Pro 1. It's been almost three years since the original came out and nearly everything of Fuji's has been updated, some ...
  • How do these two lenses do with the Fuji sensor?  I seem to recall reading somewhere that the angle of incidence can be a bit of a problem near the edges.
  • I already have the JJH adapter ring and lens hood combo.  Is this the same thing?  If so, how do I used the filter without the hood while still being able to attach the lens cap?
  • Is there a way to attach a filter to the X100S and still be able to use the factory lens cap?
  • Replied in Filter Question
    I'm considering the UV and the Clear .  With digital, is there any reason to go UV, or is Clear the better way to go?
  • Created discussions Sundry X-E2 Questions
    Getting to know my X-E2 and 35mm f/1.4.  I have a few odd questions for the group. (1) I assigned custom functions to the AF and AE buttons and now I want to restore the defaults.  How do I do this?
Activity older than 12 months is not displayed.
Total messages 1527
Threads started 293
Last post 3 hours ago
Total comments 2
Total likes 0
Last post 8 months ago
Total reviews 0
Entries 0
Votes cast 0
Photos uploaded 0