-
I would suggest fine tuning your lenses or dialing in a global fine tune adjustment if all of your shots are showing front or back focus. That's why those settings are there.
-
After you wet clean, if you still have some smudges then use a dry pad and gently rub the sensor until they disappear. Then blow off any dust and you should be good to go. Don't be afraid of...
-
I'm enjoying my defective D800 as well, thanks! :)
-
As others have said, very beautiful and inspiring work! Use the healing brush in Photoshop to get rid of your sensor spots. I had similar problems with my D800 which went away after about 3,000...
-
If you switch the layer blending mode to "color" you should see improved results. I find the color shifts get a little tighter and there is less chroma noise. If you use any of the sharpening...
-
Then you are doing something wrong or don't know how to use NX2. You have control over the warmth of each photo in degrees kelvin if you know where to look and how to use the function. This alone...
-
Unless I'm mistaken, most journalism today is disseminated over the internet. You don't need a D600 to take photos destined for the internet or even a rather low resolution newspaper print. In...
-
Confused... if your images are too yellow, adjust the white balance in NX2 or, better yet, right in your camera. Use a custom color control and manually move the color balance in your camera...
-
All of that effort and expense, yet you are still not following backup basics. Without an off-site backup, all of your efforts are absolutely useless in the event of a tsunami or earthquake. With...
-
BEAUTIFUL photo! Very ethereal and dreamy.
I don't know much about the D3S, but the photo looks rather noisy for ISO 640. Might the visible noise be the result of sharpening?
-
Thank you for confirming your identity :)
-
I'm also 44 and my eyesight is going... :)
-
It may be the way you processed or reduced the images, but none of them appear particularly sharp. In fact, they are all quite soft.
-
Very few people here at DPR even know how to use their cameras. Probably the majority of D600 owners complaining about dust don't even know about the sensor cleaning function. One visible person in...
-
It's called "ultrasonic" for a reason... You are expecting it to bang or something? LOL
-
I don't know a single person that is concerned about any of these things. The few that have expressed concerns are your typical curmudgeons who don't want to update their computers and drives to...
-
In the two days that passed, have you contacted Nikon to inform them of the serial number inconsistency? It seems to me that you would have a better answer to your question by contacting Nikon...
-
Who is arguing that FX is cheaper? It's not cheaper, but it's better. :)
-
Who got seven cameras in a row with AF problems? Are they hallucinating?
-
What difference does that make? Oil spots can be cleaned just as easily.
Activity older than 12 months is not displayed.
|
| Total messages |
717 |
| Threads started |
7 |
| Last post |
6 hours ago |
| Entries |
1 |
| Votes cast |
0 |
| Last entry |
10 months ago |
| Photos uploaded |
17 |
| Last upload |
2 months ago |
|