TheSquid

TheSquid

Joined on Oct 3, 2011

TheSquid's recent activity

  • Why would they make an 8-16 F4 when they already sell (and for a long time now) a 7-14 F4?  Just doesn't make sense as to why you would want such a lens.  A lens such as you propose would be the ...
  • If you have the money to buy a couple of new items without selling off the old, I'd suggest the following: Buy an EM1, 12-40f2.8 and 40-150f2.8 (will be available soon), and the 45 f1.8 and ...
  • they gotta grow Okra somewhere ya know.
  • Replied in Olympus Om-4
    I picked up an OM4T years ago with an MD1.  The camera still works but the film advance has messed up a bit and sometimes won't fully advance the negative through resulting in partially double ...
  • There are 5 slider settings on the T32. The far left is full power, one to the right is half power.  The 3rd, 4th, and 5th (all the way to the right) use a sensor located in the O of Olympus on the ...
  • the 4/3 / m4/3 hotshoe is the same layout as the canon hotshoe minus one pin. If the hotshoe trigger is simply the center pin to fire the flashes, then yes, it will work. If the hotshoe trigger ...
  • If you have the T32, you can use it on the 4/3 and m4/3 cameras.  It's trigger voltage is safe for use. Deal is, you will either have to use the flashes auto setting and set the corresponding ...
  • You could have used the Metz with the EM10 as well since it will trigger via flash burst. You can also use the FL50 on camera and the Metz unit off camera triggered by the FL50. You can also buy a ...
  • you can trigger it but it won't do TTL off camera like the higher powered Metz units (I don't think the 36 will do it) will and the Olympus/Panasonic flashes do.  FL36R, FL50R, FL600, and the ...
  • About the sensor tech..... EM5 was first camera to get the particular sensor in it followed by two PEN models with the same sensor. Sony makes this sensor from what has been announced. EM1 had an ...
  • I know on my E30 if I set it to high I'll end up occasionally having multiple frames but if I set it to low I only have extra frames when I mean to. Then again, I gew up using a motor drive and ...
  • 4/3rds and micro 4/3rds are an open standard that many manufacturers market products for. If the product works on one camera in the system, it works on all cameras in the system that are designed ...
  • It's not OLYMPUS's fault....it's the fault of the software manufacturers NOT giving a free update to make each new camera compatible with their old software.  It's because they WANT you to buy new ...
  • Submitted a challenge entry creekchallenge
    OLYMPUS DIGITAL CAMERA
    Placed 32nd in the challenge. OLYMPUS DIGITAL CAMERA
  • I'm thinking an EM1 equipped with the 12-40 and an EM1 equipped with the 40-150 will be just about all you would need for most shots at a wedding.....unfortunately, we still have to wait on that ...
  • The EM1 will be a closer feel to the OM1/OM2 with motor drive than the EM10. The EM1 has a larger and better viewfinder than the EM10. Focus peaking is on both, but with the larger viewfinder I ...
  • Olympus has a wireless flash option built in. I think the FL600r flash unit can be on camera and be the command unit.  You would need a second Olympus/Panasonic/Metz unit that is wireless ...
  • Now, they have enough image resolution to offer a decent print from the technology. 8x10 should look pretty good, 16x20 is probably as large as you'd want to go (without seeing an actual print...

  • top of the menu when you click menu > card setup>format
  • as said above, have you formatted the card IN the EM1? This is a reason why to only format the card in camera.  Never erase photos off the card individually/groups.  Only use the format function in ...
Activity older than 12 months is not displayed.
TheSquid has not added any gear yet.
Total messages 204
Threads started 2
Last post 1 day ago
Total comments 7
Total likes 23
Last post 5 months ago
Total reviews 0
Entries 1
Votes cast 0
Last entry 4 months ago
Photos uploaded 10
Last upload 4 months ago