matt simpson

Ah, ok i see.I will have to work out how to wind the wire off without having to undo the bracket then.

It has the 2 ends which just pull out, but in the middle it has a 'support' that is fastened to the tube with wire. This is screwed into the body of the flash housing.I had a look at undoing the...

I will try this.I am sure that they are the same (BW2030 i think).I need a special star/hex screwdriver (with hole for nipple) to take them off.Will report back with what happens.

I have 4 Bowens lights, 2x 250 and 2x 500w (if memory servies me).One of the lights has an intermittant fault in that it wont flash but gives a long beeping sound (about 1 seconds or so).Anybody...

There is still plenty of garden left :-) We still have a large lawn and another vegetable patch next to the green house.I am not much of a gardener (but do like a nice garden), the wife is the one...

30/9/12Not updated for a while so here is the progress so far...Completed the walls now, all boarded up (wood boards and plaster boards), with insulation between them and the outer skin.Put a bit a...

Why not hit eBay and get both?Ok, the quality may not be as good as branded ones but it will help you decide which is for you. I have eBay ones and find them great. My beauty dish cost me about £50.

Just a quick update.I have not done a great deal to the shed in the last few weeks.I have put wood on part of 2 walls and papered it to create an area for model photography. I have also put steps...

Thanks :-) -- Matt Simpson

My first shoot... This was just a friend. I am still getting used to it, but i enjoyed the shoot. -- Matt Simpson

Had a bit of as mess around with my punchbag shoot and like the newer version more. Bought some small led lights on a string for £10 from B&Q.

Well, eventually set some lights up to have a mess around.This took literally 10 minutes (5 of which were me trying to work out why my flash wasnt going off until i realised i had put the...

Sorry i have not updated in a while, but been busy at work, ran out of cash and reached my upload limit on Photobucket. Anyway, enough of the excuses, here is the latest instalment...17/7/12Been...

Not too much done today, got one of the double glazed units put in, but when i went to put the long one in (next to the door i shattered it. I might end up just blocking this up i think. I also...

Thanks guys.I am going to perferate the polythene, enough to allow air to circulate, but not enough to allow rain water in. I will probably score it 'criss cross' with a knife.Lol, just re-read...

3/6/12Busy few days (between showers).Managed to get the roof felt on. I used a quite thick and expensive felt that was put on using felt adhesive.This stuff is awfull stuff. Its about as thick as...

I might perforate the polythene sheeting to allow air circulation but still stop moisture. -- Matt Simpson

To be honest, i forgot about them lol.I still have them to use, but could i not just put the inner cladding on (sheets of ply most likely) to stop any side to side movement?

Thanks, it's nice to hear comments like that. -- Matt Simpson

Thanks. I am covered in cuts and scrape and bruises. In fact i am looking forward to getting back to work for a rest, lol.Just looked at a 10 day forcast, after today it looks like rain up until...