-
Is this from personal experience? I have had the S2, S5, SX10 G11 and 60D, all with the swivel screen. Not one problem in any of the cameras. I haven't heard too many complaints on the forums about...
-
I have had my 70-300 VC a little over a year now and I haven't seen a problem with auto focus hits. But, I'm going to give this a try because: I may not know what I'm missing. I have been very...
-
That is the one I have. Here are a couple of shots with the 15-85mm, with and without polarization. I think it works pretty well.
With polarizer at full strength - note the sky and...
-
It looks like you are getting quite sharp shots at 300mm at F6.7. so you are not having to stop down too much. Nice work. Are most of your shots handheld/tripod or both?
-
There you go. Nice work. You're getting the hang of this lens.
-
I think it's decently sharp at 300mm when stopped down. Below 300mm it's sharp at 5.6. At least that has been my experience. You really need to stop down at 300mm to at least F7.1 - F8. Below...
-
I didn't read every post so this may have been covered. What this photo needs is to have been taken with a polarizer on the lens. I've included one off my test shots. It would have definitely...
-
I have been using the Canon Solutions software that came with my MP970 printer for printing with the Pro 9000 mkll. I do my editing in Elements 10 and then for printing switch over to the Canon...
-
As you have, I find Costco prints to just be plain inconsistent. Some good, some not so good. I'm printing my own on the Pro 9000 mkll and they come out looking great.
Here's a link to a recent...
-
It was about 30 feet and yes at 300mm - stopped down to F11, they are sharp. Wide open at 300mm it's not as shrap. Below 300mm - let's say 270mm - wide open - it's pretty sharp. It's known that at...
-
I'm very happy with my Tamron. I went back and forth between the Canon 70-300mm non L and the Tamron. With all the research I did and reading of reviews I went with the Tamron. A couple of major...
-
I purchased some Epson 11x14 paper for use in my Canon Pro 9000 Mark ll. I bought the Epson paper because Canon doesn't have 11 X 14 paper. When I went to print I just realized the printer doesn't...
-
Thank you for your comments. I went to the DryCreekPhoto site and did some other on line searches. I went back to my Costco photo account to see what my default settings are. As it turns out I had...
-
Check out this post of mine. I just picked up a brand Canon Pro 9000 Mkll.
http://forums.dpreview.com/forums/post/50483636
-
Here's my recent experience with store printing.
http://forums.dpreview.com/forums/post/50483636
-
I used to think my favorite big box warehouse store did a nice job on small prints and enlargements, then quality took a turn for the worse. I've tried again several times. Still the same old bad...
-
Brian, i may do that. I do have a frame that is 11 x 14 though.
-
Bob, thank you for the link. I just placed my order.
-
Thank you for the link. I'll try Red River.
-
All, thank you for your thoughts. It helps.
Activity older than 12 months is not displayed.
|
| Total messages |
1262 |
| Threads started |
129 |
| Last post |
1 month ago |
| Total reviews |
1 |
| Last review |
May 27, 2007 |
| Photos uploaded |
50 |
| Last upload |
Dec 11, 2011 |
mtndew has not added any dpreview gear yet.
|