Gerd Waloszek

Gerd Waloszek

Lives in Germany Germany
Works as a Usability (retired)
Has a website at http://www.waloszek.de
Joined on Jul 24, 2001

Gerd Waloszek's recent activity

  • Thank you for your note. I installed firmware 4.0 when it was released. My remark was directed at posters who asked for the firmware with which the GR was delivered. Best regards, Gerd
  • I took a look at the RAW file in Adobe PSE using CameraRaw. In the the piano region, I can find some double contours. Therefore, I think that camera shake is one reason for the softness. It also ...
  • Looks like dust to me, but in this case like a minor issue, particular in that location. Best regards, Gerd
  • Or using the AF button . Before that you have to configure it as "AFL" button in the menu. You might also want to configure it as a "toggle button" so that you need not press the button all the time. ...
  • Hi, You asked: a. Given my experience is recently with Sony, and Ricoh's system, very different, am I going to find it too difficult to learn about this camera on the run and having less chance to ...
  • As far as I see it now (see my third or fourth posting), this will not help -- at least it did not change anything when I tested it with my working P10 module. Sorry & best regards, Gerd
  • Right! I did so for my Leica X Vario and had to have to sensor cleaned (luckily at no cost). I found the dust by accident in spring, and when I looked at my photos more closely, I found that it had ...
  • Thank you for your reply. I am sorry that nothing did help... Best regards, Gerd
  • Just to clarify things about the manual: On page 46 (Setting the ISO speed), it says in a note: (1) If [Dynamic Range Correction] is set in the [Shooting] menu, the ISO speeds that can be set are limited.
  • I bought my GR in late 2013 in Germany. The serial number is 14102729, that is lower than yours. My sample had firmware version 1.11, although the most recent firmware update (2.03) had already ...
  • I bought my GR in late 2013 in Germany. The serial number is 14102729, that is lower than yours. My sample had firmware version 1.11, although the most recent firmware update (2.03) had already ...
  • Today, I found that Tom mentioned the toggle function of the macro button for manual focusing already in a posting nearly two years ago ( Hooray a bit more ) in the Ricohforum. Please excuse me ...
  • Replied in New GR set-up?
    Perhaps to put rube39's words differently, the GR manual states on page 99: The following items can be registered: Camera settings (1) Shooting mode (2) Aperture value and shutter speed ...
  • Tom, thanks for your additions. I think we will have to wait for the original poster's reply (provided there will be one...) to see what was relevant in his or her case... Best regards, Gerd
  • Just a few additions to this point from my experimentation with this: The state of the VF/LCD buttons seems to be stored in the body. It is kept when you turn the camera off and on again. It is ...
  • I just read the GXR (body) manual (p.42) and stumbled over the following passage: Turning the Picture Display On/Off Pressing the VF/LCD button while the picture display is on turns the picture ...
  • Actually no, apart from sending the P10 camera unit to a repair facility. Before you do so, however, you might want to reset the unit to the factory settings - if you haven't done so already (Menu ...
  • Replied in Manual Focusing
    To continue the series of GR features, here is a discovery that I made today by accident and that I could not find in the manual. According to the manual and a message on the screen, you have to ...
  • Thank you, Tom, for your thoughts on the Pana vs. Ricoh relationship. Admittedly, I never went into this (my brother has a Pana GH1 but always bemoans the complexity of the UI...). > I too shunned ...
  • Thanks Tom! I added the information to my GR FAQ: http://www.waloszek.de/gr_faq_e.php#ref_tilt Best regards, Gerd P.S.: Need a break now after all these additions to the site...
Activity older than 12 months is not displayed.
Total messages 791
Threads started 58
Last post 2 months ago
Total comments 0
Total likes 0
Total reviews 0
Entries 0
Votes cast 0
Photos uploaded 157
Last upload Aug 30, 2010