masoncl

Darktable 1.2 fully supports the gh3.  It works well here. -chris

I used:align_image_stack -a stack -C This produces a bunch of tif files that have the result of aligning all the images.  -C means they are all cropped to the...

It just needs to be high enough for hand shake.  You can push exposure on the resulting files pretty far, but the higher you push it the more images you need.The real problem is that stacking only...

Stacking raws with software outside the camera works pretty well at higher isos, even hand held. I know it means you can't instantly upload, but when you're stuck shooting at iso 25600 and don't...

http://www.olympus.co.jp/en/support/imsg/digicamera/download/manual/accessories/man_fl50_e.pdfSee page 62.  That part of the manual is talking about continuous firing at 1 second intervals.  I'd...

My AF50 is one of the metz line that is native to the m43 cameras.  So, it mounts directly without any adapters.-chris

Part two ;)Switching the exposure metering allows more fine grained control of flash exposure.   The TTL tries very hard to avoid over exposed areas.  So if you're shooting with a window or a...

Definitely, I was just surprised that they went to all the trouble to setup the camera dials to control the flash, but then left out so many common uses.  One nice feature is they give visual...

It does still work well in TTL mode, but you have to control the FEC from the flash instead of from the camera.  Or if you're using the popup, you have to go menu diving each time you want to...

After playing with things, I turned off the new exposure compensated flash mode and just use the buttons on the back of the flash.  For the pop up flash, I can see the new mode helping.-chris

Hi everyone,Since all the info here helped a lot for my gh3 decision, I thought I'd add a few details on what I've found so far. You never really have to wait for the camera.  With a fast flash...

The camera flashes the display when it is under exposed.  Turn on the flash.-chris

Playing around with the gh3 here.  Seems to work nicely so far, thanks to everyone here for their writeups and notes.ISO 3200 -- not bad