Fast lenses, and High ISO

Started 2 months ago | Discussions thread
bobn2
Forum ProPosts: 29,875
Like?
Re: You forgot something.
In reply to Great Bustard, 2 months ago

Great Bustard wrote:

EinsteinsGhost wrote:

Great Bustard wrote:

EinsteinsGhost wrote:

Great Bustard wrote:

EinsteinsGhost wrote:

You're wrong about that, unless you mean that it is also wrongly used for DOF based arguments. Fast is about speed (faster the lens, shorter the exposure time for identical conditions).

What shutter speed can you use on mFT at f/2 that you cannot use on FF at f/4?

Obviously, you didn't try to understand the point made. Let me make it simpler:

Scene brightness: 9 EV

ISO: 100

With these conditions, f/2 will have a faster shutter speed of about 1/4000s. An aperture of f/4 will give you 1/2000s. A larger or smaller sensor will not change that.

Obviously, you do not understand ISO. Why would a FF photographer feel compelled to shoot the same ISO as the mFT photographer?

I don't see a reason for a FF photographer feeling compelled to shoot an ISO 100 shot at ISO 3200.

Neither do I:

http://www.josephjamesphotography.com/equivalence/#purpose

If one system can take a photo that another system cannot, and that results in a "better" photo, then, of course, we would do so.

I see both photographers to shoot at the lowest possible ISO and in this case, it will be the base ISO.

It's fair to say that if f/2 meters at 1/4000, and thus f/4 would meter for 1/1000, then, sure, 1/1000 is more than likely to be "fast enough" in almost all circumstances. What happens with f/2 meters at 1/400? Will f/4 at 1/100 be "fast enough"?

Please tell us about the exposure differences here as they relate to the visual properties of the photo:

  • 50mm f/2 1/100 ISO 400 on mFT
  • 100mm f/2 1/100 ISO 400 on FF
  • 100mm f/4 1/100 ISO 1600 on FF

Same exposure on first and second (f/2, 1/100s, ISO 400). Lower exposure in third by two stops.

That is correct! However, you forgot to tell us how this relates to the visual properties of the photo.

The visual property that an exposure is all about is brightness of the scene. For same brightness, same exposure is expected. With higher ISO (third bullet above), you're doing just that, increasing brightness by two stop to compensate for reduced exposure by two stops.

So what we see here, really, is that exposure is merely part of the equation:

  • Exposure (photons / mm²) = Sensor Illuminance (photons / mm² / s) · Time (s)

Not exactly. Luminous exposure, which is what we use in photography, is measured in luminous flux times time, which is luminous energy. Not quite the same thing as 'photons / mm². If we were radiologists using radiometric exposure, then we'd be measuring that in W/m², and it would become clearer that it is a power density, and integrated over time it becomes an energy density, which can then be related to a photon count, given some assumed distribution of the photon energies. The relationship between radiometric and luminous exposure is that luminous exposure is weighted by the luminosity function, that is, includes only visible energy. So, while our cameras do in fact work as photon counters, that is an approximation tio what they should be doing photographically (film cameras are also photon counters, they just count photons in pairs and their QE is rather low).

  • Brightness (photons / mm²) = Exposure (photons / mm²) · Amplification (unitless)

No, no, no. You don't get 'brightness' by 'amplifying' exposure. The luminance of a viewed image depends on what you're using to view it. The luminosity of your TV,monitor or projector or the strength of the light that you're using to view a print. It also continues to provide light as long as you view it, it's luminous energy is not limited by the luminous energy in the exposure. So, not 'amplification' at all. This is the root of the 'ISO' misunderstanding.  So, the output of`the photo isn't a luminance. In film days it was a 'density', in digital days it's a file value denoting a grey scale. It simply represents the value from black to whiter than white that we want this exposure to represent (white is set a bit grey so we can have convincing light sources and specular reflections in our photos, if what was white, they'd just look white). Generally rather than 'amplification' it is a 'mapping', which  maps the set of exposures which the sensor measures to a set of grey scale values which will include gamma correction and very likely a film like S- curve.

  • Total Light (photons) = Exposure (photons / mm²) · Effective Sensor Area (mm²)
  • Total Light Collected (electrons) = Total Light (photons) · QE (electrons / photon)
-- hide signature --

Bob

Reply   Reply with quote   Complain
Post (hide subjects)Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark post MMy threads
Color scheme? Blue / Yellow