Shutter Shock: My ep5 is bad. Would an em5 do better?

Started 7 months ago | Discussions thread
Anders W
Forum ProPosts: 17,500Gear list
Like?
Re: Too much religion not any science
In reply to Steen Bay, 7 months ago

Steen Bay wrote:

Anders W wrote:

Steen Bay wrote:

Anders W wrote:

The evidence texinwien points to indicates that blur due to SS can occur even when shooting from a tripod. It does not demonstrate that the risk of blur due to SS increases when shooting from a tripod.

In my own quite extensive testing with my E-M5, it is clearly the other way around. The risk/magnitude of blur due to SS declines when shooting from a tripod. Furthermore, when using a sufficiently heavy and sturdy "tripod" (such as the floor of my kitchen with tiles on top of conrete), there is no blur at all due to SS even with my 100-300 at 300 mm and no anti-shock delay.

The reason why a tripod can decrease the risk of blur due to SS is that one important mechanism (and the only one I have so far found clear-cut evidence for in the tests I have conducted with my own gear although I remain open to other possibilities) is that shutter action causes a displacement of the camera as a whole. The risk/magnitude of such displacement declines if the camera is put on a reasonably sturdy tripod and is eliminated altogether if it is put on a sufficently heavy and sturdy "tripod" of the type described above. In other words, given that SS causes blur via displacement of the camera as a whole, the risk/magnitude of such blur declines if the camera "has no place to go".

Though, your kitchen floor only prevents movement in one direction (downwards).

No, it effectively prevents it from going upwards too due to the behavior of the normal force (the one counteracting the force of gravity) on a rigid as opposed to a non-rigid surface.

Sorry, but don't quite understand what it is that should prevent the camera from moving upwards/sidewards. My electric shaver will still vibrate if put on hard/heavy surface. Probably less than if put on a carpet, but still.

The camera may still vibrate (relative internal displacements) but it will not be displaced as a whole. Consider, for example, what will happen when the shutter blades accelerate downwards. According to Newton's third law (that of action and reaction), the force accelerating the blades implies that an equally large force is acting on the camera as a whole (apart from the shutter blades) in the opposite direction (upwards). This effectively reduces the downward force of gravity on the camera.

If the camera is sitting on a perfectly rigid surface, the normal force (the one acting upwards, counteracting the force of gravity) will instantly adapt so as to match the reduced downward force. The camera will therefore not move at all. If, instead, the camera is sitting in the soft flesh of your hands, it is effectively sitting on a spring-loaded mechanism. In this case, the normal force cannot be reduced except by having the depressed flesh expand a bit. Consequently, the camera will move upwards until the expansion is sufficient to reach partiy between downward and upward forces.

 Anders W's gear list:Anders W's gear list
Panasonic Lumix DMC-G1 Olympus OM-D E-M5 Olympus E-M1 Panasonic Lumix G Vario 14-45mm F3.5-5.6 ASPH OIS Panasonic Lumix G Vario 7-14mm F4 ASPH +21 more
Reply   Reply with quote   Complain
Post (hide subjects)Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark post MMy threads
Color scheme? Blue / Yellow