Help with guide numbers when using a flash manually
Re: Help with guide numbers when using a flash manually
In reply to Island Golfer,
Apr 18, 2013

Island Golfer wrote:
Based upon the chart you supply, the manufacturer of the flash unit presumes that you will be shooting at 100 ASA (100 ISO).
“Guide Numbers” are nothing more than a number the manufacturer supplies to make proper calculations when you are trying to figure out which F/stop to use at which distance. They bare no relationship to how far away your subject is standing from your camera. You have to figure out that distance by using this Guide Number that is supplied. To use these Guide Numbers you must first have a formula to plug them into. The basic formula used is:
Guide Number = Subject Distance x F/Number you want to use (GN=Distance x F/number)
The “Distances” the manufacturer has given you in their chart, are their suggested distances that you might want to shoot at. Unfortunately, they have put them in “meters”. So, you must first convert their “meter” distances to “feet”. Do that by multiplying the number they give you by .3048. Once you have converted their “meter” numbers to “feet”, you now have two parts of the formula. The “F/Stop” to use at that distance, is the number you must now figure out.
Let’s take one of these, and see how it works. Let’s use their number of 105 meters. By multiplying 105 meters X .3048, we come up with 32.004 feet. Round it off to “32” for use in the formula. So far, that gives you:
32 (the GN) = distance x F/number
Now, you must figure which multiple of the F/stop you want to use, that will calculate out to the Guide Number of 32, when you multiply it by the number of feet your subject is standing from your camera. So, “what” times “what” will equal 32? The answer is 8 x 4. Now, plug those two numbers into the formula, and you get:
32 (the GN) = 8 (feet) x 4 (the F/stop to use).
So, if your subject is standing 8 feet away, you must use an F/stop of F/4 to properly illuminate the subject.
You must do this, using each “Guide Number” the manufacturer supplied in their chart, in order to figure out which F/stop you can use at what distance, when you use that flash.
 hide signature truview
I G ,
You have the meter to feet conversion backwards .
Remember a meter is 3.2808 feet . Another way to remember the difference is to know the number of inches in a meter , which is 39.370078
So since it takes 3.28 fet to span the same distance as one meter You will need to divide the meters by the .3048 , not multiply . you will always end up with more than three times the number of feet to span the same distance .
105 meters is the same as 344.488 feet . ( another reason the chart makes no sense ) .
Dusty
Post (hide subjects)  Posted by  When  

Apr 14, 2013  
Apr 14, 2013  
Apr 14, 2013  
Apr 14, 2013  
Apr 15, 2013  
Apr 15, 2013  
Apr 15, 2013  
Apr 18, 2013  
Apr 18, 2013  
Apr 18, 2013  
Apr 20, 2013 