Calibrating lens to camera .. have you done it and does it really work ?

Started Jan 20, 2013 | Questions thread
ForumParentFirstPreviousNextNext unread
Flat view
Junior MemberPosts: 37Gear list
Calibrating lens to camera .. have you done it and does it really work ?
Jan 20, 2013

Calibrating lens to camera .. Is this really a useful thing to do .. ?? .. Please read to the end .. I would be interested in hearing from photographers who have done that and noticed an improvement .. Please let me know your experiences ..

Here are some internet resources ..

I would be interested in hearing from photographers who have done that and noticed an improvement .. So please let me know your experiences before I go out to buy all this kit!!

I have to say that I have not tried this complete setup myself yet .. but tried the cheap way .. using a printed focus target sheet on a wall and also tried it on a floor or table with camera at 45 degrees, and I failed on both occasions to achieve a result that would produce better focused and sharper photos in real life after the calibration. I went out with my camera and shot handheld and on tripod real life shots with and without calibration and I have to say I have not seen an improvement .. so maybe the cheap way is not valid or reliable and maybe the more methodical way stated above would be more useful ..

Remember that only one sample of a certain lens can be registered in the camera at any one time, and that the adjustment is saved in the camera. Also, if all the lenses register the same result, it  is probably the camera body that needs to be adjusted for all the lenses.

  1. Calibrate a zoom using the longest focal length (the tele end of the zoom range)
  2. Use the maximum aperture (wide open)
  3. Use 25-50x focal length in mm as testing distance between camera and target
  4. Use tripod, mirror-up and remote shutter release
  5. If you print your own target sheet, do it on inkjet and not laser
  6. Do 3 shots per adjustment
  7. Do +/- adjustments and keep doing this until you narrow down your adjustment
  8. Use JPEG’s or RAW without any adjustments
  9. Use a standard target (DataColor© SpyderLensCal© or Michael Tapes Design© LensAlign©)
  10. Use computer software (Michael Tapes Design© FocusTune© or Reikan© FoCal©) to decide the best adjustment value

From several resources on the internet I gathered the following, and others may differ;

All said .. if you find that your lens is either front or back focusing enough at a given focal length, aperture and distance (usually longest focal  length in zoom, wide open, and at the minimal focusing distance as DOF is shallowest) then fine-tuning or micro-adjustment is going to be helpful.

Rumours about quality control for cameras and lenses indicate they would pass the test as long as any focusing variations fall within the depth of field at a given focal length, aperture and focal distance.

Common sense dictates making sure that any focusing problems are investigated to make sure that it is well and truly a problem that requires at least fine tuning, or if more serious sending the camera or lens back for servicing or exchange.

If pictures from your camera, lens or combination are lacking proper focus, it may be that camera, lens, or both are causing front or back focusing.

Both Canon and Nikon have this facility in their higher end bodies under different names; AF Micro adjustment in Canon and AF Fine-Tune in Nikon.

 HEWCanon's gear list:HEWCanon's gear list
Nikon D600 Nikon AF-S Nikkor 16-35mm f/4G ED VR Nikon AF Nikkor 50mm f/1.8D Tamron SP AF 90mm F/2.8 Di Macro Nikon AF-S Nikkor 24-120mm f/4G ED VR +4 more
This question has not been answered yet.
ForumParentFirstPreviousNextNext unread
Flat view
ForumParentFirstPreviousNextNext unread
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark post MMy threads
Color scheme? Blue / Yellow