Give new life to your NX10 -> Upgrade it to an NX11

Howdy

Thanks to LancerDPR who pointed me to this chinese forum:

http://www.dchome.net/forum.php?mod=viewthread&tid=1150756

I was able to flash NX11 firmware into my NX10.

(What I was really looking for was the focus bar assist in MF mode, the ISO adjust in 1/3 was a plus)

DISCLAIMER: DO IT AT YOUR OWN RISK AND ONLY IF YOU ARE READY TO BRICK YOUR CAMERA!

In the chinese forum, they say that the heat of the machine increases and that there is probably some overclocking at work.

Steps:
- Download latest NX11 firmware (1.11).
- Extract the nx11.bin file, rename it to nx10.bin and copy it to the root of the SD card.
- Enter the engeneering menu of the NX10. (Put the mode dial in smart mode -> Left -> OK -> Right -> Av (do not release) -> OK)
- Choose 1. FW UPDATE -> OK
- Choose (1) BODY FW UPDATE
- Choose OK
- At this step, the green light should start flashing and a blue bar should appear on screen.
- If the green light starts flashing but the blue bar does not appear, do not worry, wait for the light to stop flashing and turn off the camera, it means the update was not done. Just do it again (that's what I did)
- After the blue bar reaches 3/4 of the screen, the screen should go black, just half press the shutter and you should already be in the NX11 firmware.