Z990 how to bracket shoot?

Started Nov 18, 2012 | Discussions thread
Gregory Chang
Regular MemberPosts: 283
Like?
Re: Z990 how to bracket shoot?
In reply to chiue, Nov 20, 2012

chiue wrote:

If you have not found out yet, here is the answer:

In PSMA mode. In the menu on top. Scroll to the "Wrench" setting (which is at the end of the menu). Select it and scroll down to the Exposure Bracketing. Select it, you will be able to select off, +/- 0.3, +/- 0.7 or +/- 1.0. Select your refer bracketing. Then shoot. The camear will take 3 pictures with your selected bracketing range. But remember to turn it to 'off' when you're done with it. It would not reset to "off" even you turn off the camera, so you need to manually turn it off when you're done with it.

Please also check the firm ware in your camera if it is V1.2, if not download the latest version and the extend user guide from Kodak site while it is still available.

-- hide signature --

chiue -
Nikon D5000 / Kodak Z990 P880 DX7590 Z915 DX6440 V803 M420 C190 C875 Zx3
Kodak Digital Cameras Galleries
http://www.wix.com/chiuestar/Kodak-DC
http://i13.photobucket.com/albums/a300/chiue/camera/cameras-a2.jpg

thanks for the comprehensive answer.

On my Z990, I have firmware v1.12 (not 1.2), checked with kodak support and I have the latest firmware.  I follow your instructions and and I am unable to set the camera other than the "off" position on bracket choices.  Either by using the 4-way button or the scroll button on my cam.  This is on P or M setting, it refuses to go off of "off" setting.

I will try to reinstall the firmware again and report back.

-- hide signature --

---
watch out for the rattlers...

Reply   Reply with quote   Complain
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark post MMy threads
Color scheme? Blue / Yellow