Firmware 1.01 for J1/V1 is out

In europe its available here

J1: https://nikoneurope-en.custhelp.com/app/answers/detail/a_id/50939
V1: https://nikoneurope-en.custhelp.com/app/answers/detail/a_id/50938

From Nikon's website .....

Support for the Mount Adapter FT1 has been added.
The FT1 enables the use of Nikon F-mount NIKKOR lenses with the V1.
Primary specifications are as follows:

• Autofocusing is possible when AF-S lenses are used. However, focus mode must be set to AF-S (Single AF) and AF-area mode is fixed at Single-point with only the center focus point used.

• The focus indicator (range finder) can be used with CPU lenses.

• [P], [S], [A], and [M] exposure modes can be used with CPU lenses.

• [A] and [M] exposure modes can be used with non-CPU lenses. Aperture is specified using the aperture ring on the lens.

• Vibration reduction (VR) functions when VR lenses are used. Enable vibration reduction, or specify a setting, using switches on the lens.

• Shooting in Motion Snapshot mode is only possible when focus has been acquired with an AF-S lens.

• The Smart Photo Selector function cannot be used.

click here for further information regarding the operation of the FT1 focus indicator.

A Pixel mapping item has been added to the setup menu.
Use this feature when unexpected bright spots are recorded in images.

regards,
Andy

--
Blog - http://nikonandye.wordpress.com