
Minolta DiMAGE 7 Review, Phil Askey, July 2001

Review based on a production DiMAGE 7, firmware A1 v021e *
We first heard of the two new Minolta DiMAGE 5 and 7
digital cameras at PMA on 11th
February this year (although there had been leaked information earlier).
Both cameras are based on the same functionality, body and 7x optical
zoom lens, the DiMAGE 5 has a 3.3 megapixel CCD and 32 - 250 mm equiv.
focal length range, the DiMAGE 7 a 5.2 megapixel CCD with a 28 - 200 mm
equiv. focal length range. On 23rd May I had an opportunity get a hands
on with the DiMAGE 7 at Minolta UK, and was able to turn this into
a brief preview article.
The DiMAGE 7 is aimed at the prosumer level of the market,
it sports all the features you'd expect of a camera in this sector, full
manual controls, pre-programmed scene exposures, selectable ISO sensitivities,
a RAW mode and control over in-camera image processing algorithms. It
also has a very "long" 7x optical zoom lens which gives it a
very attractive 28 - 200 mm equiv. focal length range (this covers almost
everything even the most pro-prosumer should need). Lastly comes the resolution,
the DiMAGE 7 is currently (at the time of writing this review) the only
non-professional digital camera to offer almost 5 megapixels of resolution
(4.92 megapixels effective).
It has also, to be fair, drawn quite a few sharp breaths
over its design, of which we'll cover later in the review but I'll try
not to linger...
* UPDATED August 2001: I have now
updated this review with results from a production DiMAGE 7 with firmware
version v021e. The following sections have either been completely re-written,
updated or simply verified. (In some cases parts of the review remain
unchanged from that posted initially).
- Timings & Size
- Features
- Image Quality
- Compared to...
- Conclusion
The camera originally used for
product shots and some of the more straight forward 'features' samples
was running firmware v014e (Japan release production).
The DiMAGE 5, 7 and S304 (announced at the same time)
mark a "new generation" of digital cameras for Minolta who had
before this time been through a slightly dry time for new digital camera
products.
Here's a quick breakdown of the DIFFERENCES between the
DiMAGE 5 and 7 (you'll find full specifications for the DiMAGE 7 on the
next page):

4.92 megapixels
There
are two main things which differentiate the DiMAGE 7 from its competition.
They are the 7x optical zoom lens (with its wide 28 mm bottom end) and
even more interesting the new 2/3" 5.24 megapixel CCD (with a 4.92
megapixel effective resolution; 2560 x 1920). While we've had no confirmation
from Minolta we suspect this is the Sony
ICX282 which is a 2/3" 5.24 mp type with all the right characteristics).
The additional resolution offered by the DiMAGE 7 is
attractive, the diagram below gives a scale representation of how much
larger the 4.92 megapixel image is:

As you can see the step from 3.1 megapixels to 4.92 megapixels is larger
than the last (from 1.92 to 3.1 mp).
Here are a few other ways of thinking about the increase in resolution
(compared to a 3.1 megapixel image):
- The image is 512 pixels wider and 384 pixels taller
- The image has 1,769,472 more pixels
- For every 4 x 4 group of pixels on a 3.1 mp image the 4.92 mp has
5 x 5 pixels
- Prints at 150 dpi would cover an extra 3.4 inches horizontally and
2.6 inches vertically
- Down-sampling the 4.92 mp image to 1280 x 960 would use a 2 x 2 group
of pixels for each pixel produced, compared to 1.6 x 1.6 pixels for
each pixel from a 3.1 mp image
Here are other things to consider about this new 5.24 megapixel sensor:
- This sensor is a year advanced in development from the 3.3 megapixel
sensor
- Bigger sensor = more data = higher processing requirements
- Bigger images = larger files = more storage

If you're new to digital photography you may wish to read the Digital
Photography Glossary before diving into this review (it may help you
understand some of the terms used).
|
Images which can be viewed
at a larger size have a small magnifying glass icon in the bottom
right corner of the image, clicking on the image will display a
larger (normally 960 x 720 or smaller if cropped) image in a new
window.
To navigate the review simply
use the next / previous page buttons, to jump to a particular section
either pick the section from the drop down or select it from the
navigation bar at the top.
DPReview calibrate their
monitors using Color Vision OptiCal at the (fairly well accepted)
PC normal gamma 2.2, this means that on our monitors we can make
out the difference between all of the (computer generated) grayscale
blocks below. We recommend to make the most of this review you should
be able to see the difference (at least) between X,Y and Z and ideally
A,B and C.
|
 |
This review is Copyright 2001 Phil
Askey and the review in part or in whole may NOT be reproduced in any
electronic or printed medium without prior permission from the author.
For information on reproducing any part of this review (or any images)
please contact: Phil Askey.
|